摘要
为在设计最小可轧厚度为0.20mm的森吉米尔轧机上生产厚0.15mm宽幅冷轧硅钢薄板,分析了影响最小可轧厚度的因素后,通过减小工作辊辊径、降低乳化液浓度、控制张力设定等措施,取得了成功。
The 0.15mm thickness oriented silicon sheet was rolling in Sendzimir mill, which smallest thickess is designed as 0.2mm. The main technology measures were introduced, such as reducing diameter of work roll, decreasing concentration of emulsion and controling tension, etc.
出处
《轧钢》
2005年第4期52-54,共3页
Steel Rolling
关键词
冷轧薄板
辊径
张力
工艺润滑
cold rolled sheet
diameter of roll
tension
technology lubrication
