期刊文献+

NMMO工艺纤维素膜成膜性能的研究 被引量:5

Study on the Properties of Cellulose Membrane Prepared by NMMO Technology
下载PDF
导出
摘要 主要研究了NMMO工艺纤维素膜的成膜特性及不同因素对该工艺纤维素膜的物理和机械性能的影响。结果表明,纤维素浓度为4%~8%(W/W)时易于成膜,且随着浆粕聚合度的增大、纤维素浓度的增加、凝固浴温度的降低,制成的膜的力学性能较好。 The properties of membrane formation and the effects of different factors on physical and mechanical properties were studied in the paper. The results showed that membrane formation with 4%-8% concentration of cellulose was better. With an increasing of DP and concentration of cellulose or a decreasing temperature of coagulation bath, the cellulose membrane has larger tensile strength.
出处 《纤维素科学与技术》 CAS CSCD 2005年第3期29-34,共6页 Journal of Cellulose Science and Technology
基金 广东省科技计划项目(2003C103016) 华南理工大学制浆造纸工程国家重点实验室研究基金(0210) 陕西省教育厅省级重点实验室2001年重点科研项目
关键词 纤维素 薄膜 N-甲基吗啉-N-氧化物(NMMO) cellulose membrane N-methylmorpholine-N-oxide (NMMO)
  • 相关文献

参考文献5

  • 1Thomas R, Antje P, Herbert S, et al. The chemistry of side reactions and byproduct formation in the system NMMO/cellulose(Lyocell process)[J]. Progress in Polymer Science, 2001, 26:1763-1837.
  • 2张耀鹏,邵惠丽,沈新元,胡学超.NMMO工艺纤维素超滤膜的研究[J].河南师范大学学报(自然科学版),2000,28(4):47-51. 被引量:12
  • 3杨光 张俐娜.再生纤维素/聚乙烯醇共混膜的研究[C]..第一届全国膜和膜过程学术报告会文集[C].大连,1991.157-160.
  • 4Fink H P, Weigel P, Purz H J, et al. Structural aspects of new cellulose fibres and films from NMMO-solution[J]. Recent Research Development in Polymer Science, 1998(2): 387-403.
  • 5张耀鹏,邵惠丽,沈新元,胡学超.NMMO法纤维素膜的结构与性能[J].膜科学与技术,2002,22(4):13-20. 被引量:20

二级参考文献5

共引文献26

同被引文献77

引证文献5

二级引证文献23

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部