摘要
实验研究了碳钢诱导下的普通硬质塑料化学镀Ni-P合金的操作方法、工艺条件及各种因素对普通硬质塑料镀层的影响,结果表明,在碳钢诱导下的镀层,生长的金属晶粒细小,晶粒之间结合紧密,质量较好,与硬质塑料基体的结合强度较高,结合强度可以达到18.9N/mm2。
The operating methods, the process and the influence factors on Ni-P alloy by chemical plating on surface of ordinary hard plastics based on inducement of carbon steel are studied. The result indicates that film quality based on inducement of carbon steel is better, combination intension of film and hard plastics is higher.
出处
《四川理工学院学报（自然科学版）》
CAS
2005年第3期29-31,共3页
Journal of Sichuan University of Science & Engineering(Natural Science Edition)
关键词
化学镀
NI-P合金
诱导
结合强度
镀层质量
chemical plating
Ni-P alloy
inducement
combination intension
film quality
