期刊文献+

高强度钢瓶人工缺口疲劳试验的研究 被引量:3

Research of Fatigue Test for High Strength Steel Flawed Cylinder
下载PDF
导出
摘要 对具有人工缺口的高强度钢瓶进行疲劳试验研究,试验结果表明,人工缺口在高强度钢瓶疲劳试验过程中,并不以整个缺口作为疲劳裂纹扩展,新的疲劳裂纹在人工缺口的夹杂处萌生和扩展,引起钢瓶失效。 It is investigated that high strength strength steel flawde cylinder was cycled. It was showed that the flaw doe~ not propagate as a whole crack during the pressure cycling test and new fatigue cracks will originate in the flaw and lead to the tested flawed cylinder to leak.
出处 《压力容器》 北大核心 2005年第9期13-15,12,共4页 Pressure Vessel Technology
关键词 高强度钢瓶 人工缺口钢瓶 疲劳试验 high strength steel cylinder flawde cylinder fatigue test
  • 相关文献

参考文献9

  • 1陕小平,张亦良,李邦宪.压缩天然气气瓶临界裂纹尺寸的研究[J].压力容器,2003,20(12):5-7. 被引量:5
  • 2ISO/DIS9809-2,Quenched and Tempered Steel Cylinders with Tensile Strength greater than or equal to 1100MPa[S].1998.
  • 3王允昌 方青.带表面裂纹气瓶的失效分析[J].中国气瓶,1994,(2):29-32.
  • 4李惠玲 金巨年 霍洪举 由宏新.高压无缝气瓶气液爆破失效分析[J].中国气瓶,1994,(1):25-31.
  • 5张康达.压力容器接管拐角疲劳裂纹扩展的研究[J].压力容器,1984,11(6):39-44.
  • 6P.C.Paris & F.Erdogan A Critical Analysis of Crack Propagation Laws[J].J. Basic Eng. Trans. ASME Series D, 1963,85 528-534.
  • 7史宁戈 汤德铭.超高压容器的设计与安全分析[M].北京:劳动人事出版社,1987.294-306.
  • 8莫立华,徐全礼,齐瑞昌,毕敬,李东,徐勇.热处理条件对30CrNiMoV钢力学性能的影响[J].理化检验(物理分册),2000,36(8):345-348. 被引量:1
  • 9K. S. Ravichandran and J.M. Larsen Influence of Mode of Initiation on the Growth of Small Surface Cracks in Titanium Aluminum, Int. J. Fatigue, 1996,18(1):9-16.

二级参考文献8

  • 1姚希梦 等.用测力螺栓式WOL法测定硫化氢应力腐蚀的K1SCC及da/dt[J].北京工业大学学报,1980,10(2).
  • 2ParisPC,etal.ACriticalAnalysisofCrackPropagationLawsJ.ofBasicEng.1963,85:528-534
  • 3王洪.对高压气瓶用钢37SiMnCrNiMoV的强韧性中国科学院金属研究所,1995.
  • 4MohanG,etal.EffectofElectrostagRefiningontheFractureToughnessandFatigueCrackPropagationRatesinHeatTreatedAISI4340SteelEngFractMech.1980,13:851-864
  • 5MottNT.ActaMetall.1958,(6):195-197
  • 6RithieRO.MetalScience,1977,Aug./Sept.1977,368-381
  • 7RavichandranKS,etal.MicrostructaralEffectsandCrackClosureDuringNearThresholdFatigueCrackPropagationinaHigh-StrengthSteel,Metall.Trans.1987,18A:865-876
  • 8ElberW.DamageToleranceinAircraftStructures,ASTMSTP4861971,230-242

共引文献4

同被引文献45

引证文献3

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部