期刊文献+

Ni-SiO_2复合镀层组织和性能的研究

Study on the Microstructure and Performance of Ni-SiO_2 Composite Coatings
下载PDF
导出
摘要 应用电刷镀技术在45钢表面制备含有微米SiO2的镍基复合镀层,研究了复合镀层表面形貌,测试了镀层的显微硬度和摩擦磨损性能,分析了微米陶瓷颗粒沉积量对镀层摩擦磨损性能的影响.实验结果表明,微米陶瓷颗粒复合镀层较快速镍镀层具有更高的显微硬度和良好的耐磨性. Ni based coatings with micron SiO2 was prepared on 45^# steel through electro brush plating and the microstructure of the composite coating was studied. The micro hardness and friction wear characteristics were tested. The experimental results show that the composite coatings Ni/ micron SiO2 has higher micro hardness and registers a lower friction coefficient than high speed nickel coating.
作者 周细枝
出处 《湖北工业大学学报》 2005年第5期98-100,共3页 Journal of Hubei University of Technology
关键词 电刷镀 复合镀层 耐磨性 显微硬度 SIO2 electro brush plating composite coating wear characteristics micro hardness SiO2
  • 相关文献

参考文献6

二级参考文献15

共引文献34

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部