摘要
研究了惯性摩擦焊工艺参数对ＴＣ４钛合金焊接接头塑性的影响。结果表明．选择适当的焊接工艺参数可以使焊接接头在不降低强度的前提下，塑性有明显的提高，并得到了最佳焊接工艺参数。
The effect of technological parameter of inertia friction weiding on the plasticity of welded joint of TC4 titanium;alloys is studied.The results show that the plasticity of welded joint can be obviously increased and its strength not be reduced by selecting the proper welded technological parameter.Moreover,a set of optimum welded technological parameter is obtained.
出处
《热加工工艺》
CSCD
北大核心
1996年第2期6-8,共3页
Hot Working Technology
关键词
钛合金
惯性
摩擦焊
焊接接头
塑性
titanium alloy inertia friction welding welded joint plasticity
