摘要
研究了热处理工艺对Ｎｉ－Ｐ－金刚石化学复合镀层结构及性能的影响．结果显示，复合镀层在３００℃时开始晶化，经４００～５００℃热处理后形成Ｎｉ＋Ｎｉ３Ｐ＋金刚石混合结构；镀层硬度在４００℃达到最大值；热处理提高了镀层的耐磨性能．
The results showed:The crystallization of the composite coating took place at 300℃. After heat treatment at 400℃ ￣ 500 ℃, the structure of the coating was Ni+Ni3P+Diamond mixture. The hardness of the coating was the highest after heat treatment at 400℃. Heat treatment could improved the wear resistance of the coating.
出处
《热加工工艺》
CSCD
北大核心
1996年第3期32-33,共2页
Hot Working Technology
关键词
金刚石复合镀层
晶化
硬度
耐磨性
热处理
electroless Ni--P--diamond composite coating crystallization hardness wear resistance
