摘要
用光学显微镜和电子探针对两种不同爆炸复合工艺的铜／钢复合板界面层进行了观察分析。结果表明，两种爆炸复合工艺的界面均为正弦波状结合，界面焊合良好。其界面质量２号爆炸复合工艺优于１号，界面上存在Ｃｕ和Ｆｅ元素的相互扩散现象。
Observations and analysis via microscope and microprobe were performed on the bonding interfaces of the explosively cladded plates with two different processes. The results showed that the interfaces of these two explosively welded dad plates were bonded tegether in a wavy shape and were welded satisfactonty. As far as improvement of bonding interface quality is concerned, 2￣# process is superior to 1￣# process, Diffusion phenomena of elements Fe and Cu was observed in the two clad material interfaces.
出处
《钢铁研究》
CAS
1996年第3期39-41,共3页
Research on Iron and Steel
关键词
爆炸焊
复合板
界面层
金相分析
explosively welding clad plate bonding interface
