期刊文献+

混气电解加工中两相流音速及阻塞机理研究 被引量:1

Investigation on the Sound Speed and Choking Mechanism of Two Phase Flow in the Gas Mixed Electrolytic Machining(GEM)
下载PDF
导出
摘要 着重分析研究气液两相流音速特性及其阻塞机理。通过测量由小药量电雷管爆炸而产生的压力波传播速度,然后修正到音速。试验结果表明,气液两相流音速与气泡率、当地压力及其流型有关。由于气液混合物强烈的压缩性,混气电解加工间隙中易于出现类似可压缩气体的阻塞现象。 Gives emphasis to the analysis and investigation on the sound speed and choking mechanism of the gas liquid two phase flow.The pressure wave is generated by exploding small detonator.The sound speed is obtained by amending propagation velocity of pressure wave that has been measured.The result indicates that the sound speed is related to the void fraction,local pressure and flow pattern.With strong compressibility of gas liquid mixture,the choking phenomenon analogous to compressible gas will occur easily in the GEM gap.
出处 《南京航空航天大学学报》 CAS CSCD 1996年第4期540-545,共6页 Journal of Nanjing University of Aeronautics & Astronautics
基金 航空高等院校博士点科研基金资助项目
关键词 混气 电解加工 气液两相流 阻塞机理 gas mixed electrolytical machining gas liquid flow sound velocity gas liquid two phase flow flow pattern choking mechanism
  • 相关文献

参考文献2

  • 1邓新建,1987年
  • 2余承业,1979年

同被引文献7

  • 1Amalnik M S,McGeough J A.Intelligent concurrent manufacturability evaluation of design for electrochemical machining[J].Journal of Materials Processing Technology,1996,61(8):130-139.
  • 2Risko D G,Davydov A D.Manufacturing applications and productivity limitations of electrochemical machining[J].Manufactruing Science and Engineering ASME.1993,64:701-711.
  • 3ParkB J,Kim B H,Chu C N.The effects of tool electrode size on characteristics of micro electrochemical machining[J].Annals of the CIRP,2006,55 (1):197-200.
  • 4Rajurkar K P,Kozak J,Wei B,et al.Study of pulse electrochemical machining characteristics[J].Annals of the CIRP,1993,42 (1):231-234.
  • 5Ahn S H,Ryu S H.Electro-chemicalmicro drilling using ultra short pulses[J].Precision Engineering,2004,28(2):129-134.
  • 6Lee E S,Baek S Y,Cho C R.A study of thecharacteristics for electrochemical micromachiningwith ultrashort voltge pulses[J].Journal of Advance Manufacture Technology,2007,31(3):762-769.
  • 7Desilva A K M,Altena H S J,McGeough J A.Precision ECM by process characteristics modeling[J].Annals of the CIRP,2000,49(1):151-155.

引证文献1

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部