期刊文献+

高质量浓度聚合物注入时机对驱油效果的影响 被引量:5

Effects of timing of high-concentration polymer flooding on oil displacement efficiency
下载PDF
导出
摘要 为了进一步增加油田的可采储量,研究了普通聚合物驱的不同时期转注高质量浓度聚合物溶液的驱油效果.结果表明:高质量浓度聚合物驱转注时机越早或聚合物溶液的质量浓度越高,都能使原油采收率比水驱提高到或超过20%;增加原油采收率的幅度与表面活性剂/聚合物/碱驱的相当,但其费用比表面活性剂/聚合物/碱驱的低. The Visco-elastic property of partially hydrolyzed polyacrylamide(HPAM) fluid increases not only the volumetric sweep efficiency but also the displacement efficiency of the pay zone on a micro scale.The purpose is to further enhance the oil recovery by high concentration polymer flooding.The results on artificial cores with a Dykstra-Parson Coefficient of 0.72 show that an incremental recovery over water flooding of more than 20% OOIP can be obtained by early injection of the high concentration polymer solution,the earlier the better.The incremental recovery is comparable to alkali/surfactant /polymer flooding but at a lower cost.
出处 《大庆石油学院学报》 CAS 北大核心 2005年第5期16-18,23,共4页 Journal of Daqing Petroleum Institute
基金 国家973项目(GE9999022501)
关键词 高质量浓度聚合物溶液 黏弹性 注入时机 驱油效果 采收率 high concentration solution viscoelasticity timing of polymer solution injection oil displacement efficiency enhanced oil recovery
  • 相关文献

参考文献6

二级参考文献7

共引文献120

同被引文献42

引证文献5

二级引证文献40

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部