摘要
Electric arc furnace （EAF） dust from steel industries is listed by the United Sates EPA as a hazardous waste under the regulations of the Resource Conservation and Recovery Act due to the presence of lead, cadmium and chlorine. The disposal of the approximately 650000 t of EAF dust per year in the U.S. and Canada is an expensive and unresolved problem for the majority of steel companies. The Waelz process has been considered as the best process for treating the EAF dust. A process model, combined thermodynamic modeling with heat transfer calculations, has been developed to simulate the chemical reactions, mass and heat trans- fer and heat balance in the kiln. The injection of air into the slag and the temperature profile along the kiln have been modeled. The effect of （CaO＋MgO）/SiO2 on the solidus temperature of slag has also been predicted and discussed. Some optimized results have been presented.
Electric arc furnace （EAF） dust from steel industries is listed by the United Sates EPA as a hazardous waste under the regulations of the Resource Conservation and Recovery Act due to the presence of lead, cadmium and chlorine. The disposal of the approximately 650000 t of EAF dust per year in the U.S. and Canada is an expensive and unresolved problem for the majority of steel companies. The Waelz process has been considered as the best process for treating the EAF dust. A process model, combined thermodynamic modeling with heat transfer calculations, has been developed to simulate the chemical reactions, mass and heat trans- fer and heat balance in the kiln. The injection of air into the slag and the temperature profile along the kiln have been modeled. The effect of （CaO＋MgO）/SiO2 on the solidus temperature of slag has also been predicted and discussed. Some optimized results have been presented.
