摘要
通过熔炼/研磨/热压方法制备了N型(B i2Te3)0.90(Sb2Te3)0.05(Sb2Se3)0.05热压合金样品,测量了由不同工艺参数(热压温度、热压压力)制备的样品的Seebeck系数和电导率。分析了热压参数对热电性能产生的影响。特别是发现了在实验压力范围内增加热压压力会使热压样品的Seebeck系数和电导率都有所提高,这与Seebeck系数和电导率通常变化趋势相反的规律有显著差异,其结果对热压样品的电学性能提高有积极的影响。
Seebeck coefficient and electrical conductivity of the N-type (Bi2Te3)0.90(Sb2Te3)0.05(Sb2Se3)0.05 alloys prepared by melting/grinding/hot-pressing method under different process parameters (temperature and the pressure of hot-pressing)were measured and the effects of process parameters were analyzed. It has been found that the pressure of hot-pressing has a very important role in enhancing both Seebeek coefficient and electrical conductivity. The better electrical properties may be obtained.
出处
《人工晶体学报》
EI
CAS
CSCD
北大核心
2005年第5期931-935,共5页
Journal of Synthetic Crystals
基金
教育部科学技术研究重点项目(No.00163)
哈尔滨市重点科技攻关计划项目(No.01112110024)
黑龙江省教育厅科学技术计划项目(No.10541091)
关键词
热电材料
热压
SEEBECK系数
工艺参数
thermoelectric materials
hot-pressing
seebeck coefficient
process parameters