期刊文献+

Preparation and Characterization of Nanotitanium Dioxide Coating Film Doped with Fe^(3+) Ions on Porous Ceramic 被引量:2

Preparation and Characterization of Nanotitanium Dioxide Coating Film Doped with Fe^(3+) Ions on Porous Ceramic
下载PDF
导出
摘要 The nanotitanium dioxide (TiO2) photocatalytic and porous ceramic filtering technique is one of the advanced methods to effectively treat organic wastewater. The TiO2 sol doped with Fe^3+ ions was prepared by sol-gel processing. The influences of the process conditions of coating nanophotocatalytic material- Fe^3+-TiO2 film on the surface of porous ceramic filter by dipping-lift method on the performance of porous ceramic filter were studied. The porous ceramic filters have two functions at the same time, filtration and photocatalytic degradation. The results of this study showed that the pH and viscosity of the sol, amount of Fe^3+ ions doped as well as the coating times greatly affect the quality of coating film, the performance parameters and the photocatalytic activity of the porous ceramic filter. When the pH of the sol is 3-4, the viscosity is about 6 mPa.S, the amount of doped Fe^3+ ions is about 2.0 g/L, the porous ceramic filter has been shown to have the best filtering performance and photocatalytic activity. In this condition, the porosity of porous ceramic is about 42.5%, the pore diameter is 8-10μm. The degradation of methyl-orange is 74.76% under lighting for 120 rain. The nanotitanium dioxide (TiO2) photocatalytic and porous ceramic filtering technique is one of the advanced methods to effectively treat organic wastewater. The TiO2 sol doped with Fe^3+ ions was prepared by sol-gel processing. The influences of the process conditions of coating nanophotocatalytic material- Fe^3+-TiO2 film on the surface of porous ceramic filter by dipping-lift method on the performance of porous ceramic filter were studied. The porous ceramic filters have two functions at the same time, filtration and photocatalytic degradation. The results of this study showed that the pH and viscosity of the sol, amount of Fe^3+ ions doped as well as the coating times greatly affect the quality of coating film, the performance parameters and the photocatalytic activity of the porous ceramic filter. When the pH of the sol is 3-4, the viscosity is about 6 mPa.S, the amount of doped Fe^3+ ions is about 2.0 g/L, the porous ceramic filter has been shown to have the best filtering performance and photocatalytic activity. In this condition, the porosity of porous ceramic is about 42.5%, the pore diameter is 8-10μm. The degradation of methyl-orange is 74.76% under lighting for 120 rain.
作者 Kejing Xu
出处 《Journal of Natural Gas Chemistry》 EI CAS CSCD 2005年第3期168-172,共5页 天然气化学杂志(英文版)
关键词 NANOMETER Fe^3+ TiO2 FILM porous ceramic filter PHOTOCATALYSIS organic wastewater nanometer, Fe^3+, TiO2, film, porous ceramic filter, photocatalysis, organic wastewater
  • 相关文献

同被引文献15

引证文献2

二级引证文献21

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部