期刊文献+

低匹配条件下X80管线钢焊接接头的变形能力研究 被引量:10

Study of Deformability of X80 Pipeline Steel Welding Joint in Under-matching
下载PDF
导出
摘要 采用有限元法对低匹配条件下X80钢级管线钢焊接接头的变形能力进行了研究。结果表明,随着平均应变的增大,变形逐渐向焊缝区集中,且焊缝强度越低造成的应变集中越严重,焊接接头的变形能力越低。5%、10%低匹配的焊接接头的变形能力分别为0.7%、1.5%。 The deformability of under-matched X80 grade pipeline steel welding joint was studied through Finite Element Method. The results show that the deformation will gradually concentrate in the weld with the increase of average strain, and the lower the strength of weld is, the worse the strain concentration and deformability is. The deformability of 5% and 10% under-matched weld joint are respectively 0.7 %, 1.5%.
出处 《热加工工艺》 CSCD 北大核心 2005年第10期48-50,共3页 Hot Working Technology
关键词 焊接匹配 有限元法 管线钢 变形能力 weld matching Finite Element Method pipeline steel deformability
  • 相关文献

参考文献8

二级参考文献22

  • 1唐伟,史耀武.裂纹深度和强度组配对焊接接头断裂性能的影响[J].焊接学报,1995,16(1):50-56. 被引量:17
  • 2马维甸 张式程 等.低匹配焊接接头不均匀裂纹体的J积分研究[J].焊接学报,1987,8(2):89-96.
  • 3Minami F, et al. The Effect of Weld Metal Yield Strength on the Fracture Behavior of Girth Welds in Grade 550 Pipe[J]. Pipeline Technology, 1995, 18(1) :441-461.
  • 4Minami F, Ohata M, Toyoda M. Determination of required toughness of materials considering transferability to fracture performance evaluation for structure components [J].Journal Society of Naval Architects of Japan,1997, 182(2):647~657.
  • 5Minami F, Ohata M, Toyoda M. Fracture toughness requirement for fracture performance evaluation of welded joints based on the local approach [C]. In: Proc. 15th. Conf. OMAE Florence. 1996, New York: ASME, 1996.193~132.
  • 6Minami F, Hada S. Analysis of strength Mis-matching of welds on fracture performance of welded joints [C].IIW Doc. X-1254-92.
  • 7Tang W, Shi Y W. Influence of strength matching and crack depthon fracture parameters of welded joints[A].Mis-matching of Welds[C].Mechanical Engineering Publication Limited,London,1994.433~443.
  • 8霍立兴.某些制造因素对构件强度的影响[J].焊接学报,1988,9(1):51-58.
  • 9佐藤邦彦.溶接结构要览[M].东京:黑目出版社,1988.46~63.
  • 10吉玲康 庄传晶.国外X80管线钢管现场焊接方法探讨[J].石油专用管,1999,7(4):8-12.

共引文献103

同被引文献58

引证文献10

二级引证文献45

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部