期刊文献+

几种非侵入式电流测量技术 被引量:20

Techniques of Noninvasive Current Measurement
下载PDF
导出
摘要 电流测量是工业生产和科学研究中经常进行的项目。与传统的欧姆定律方法相比,非侵入式电流测量技术具有与被测电路电隔离、精度高、易于实现自动化等优点,具有广阔的应用前景。在调查非侵入式电流测量技术应用现状的基础上,总结了目前常用的几种测量方法的原理,包括电流互感器、R ogow sk i线圈、霍尔电流传感器、光学电流传感器、磁阻电流传感器等,介绍了各自的特点,并对电流传感器的发展趋势做了展望。 The current measurement is widely used in industry and scientific research,the non-invasive current measurement has advantages of high precision and automation. The principles of several non -invasive current measurement methods,such as current transformer, Rogowski coil, Hall current sensors, OCT, magnetoresistive current sensors ,are summarized based on the investigation for their application. The characteristic of each method and the developing trend of current sensors are also described.
出处 《现代电子技术》 2005年第21期80-83,88,共5页 Modern Electronics Technique
关键词 非侵入式电流测量 电流互感器 ROGOWSKI线圈 霍尔电流传感器 光学电流传感器 磁阻电流传感器 non - invasive current measurement current transformer Rogowski coil Hall current sensors OCT magnetoresistive current sensors
  • 相关文献

参考文献12

二级参考文献25

  • 1李红斌,刘延冰,张卫军,李尔宁.用于110kV变电站的光学电流互感器[J].华中理工大学学报,1995,23(7):6-10. 被引量:17
  • 2邸春程.高精度弱电流互感器的研制[J].电测仪表,1999,(6):12-14.
  • 3袁季修.继电保护关联的几个问题.第八届全国继电保护学术会议[M].,2001,3..
  • 4Radum A.An ahernative low-cost current—sensing scheme for high—current power electronics circuits [J].IEEE Trans on Industry Electronics,1995,42(1).
  • 5Radum A. An alternative low-cost current-sensing scheme for high-current power electronics circuits [J]. IEEE Trans on Industry Electronics,1995,42(1).
  • 6Livshits G A.Universal quality assurance method for resistance spot welding based on dynamic resistance [J].Welding Journal,1997,76(5):383-390.
  • 7Broomhead J H W,Dony P H.Resistance spot welding quality assurance [J].Welding & Metal Fabrication,1990,(7):172-179.
  • 8西沢敬次.回路から见た抵抗溶接のモニタリング [J].溶接技术,1981,(3):50-55.
  • 9张国雄 金篆芷.测控电路[M].北京:机械工业出版社,2000..
  • 10张国雄 金篆芷.测控电路[M].北京:机械工业出版社,2000..

共引文献103

同被引文献119

引证文献20

二级引证文献72

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部