摘要
To remove effectively the pollutants from printing and dyeing wastewater, a new complex adsorption-coagulation agent was developed and employed in dyeing wastewater treatment. The experimental results showed that better removals of COD, turbidity and color could be efficiently realized under the operating conditions of mixing at 150 r/min, reacting within 5 min and dosing at 15 g/L and 20 g/L, respectively. Combined with the settled sludge, the agent could be recycled for further adsorption and coagulation within 10 times. Compared to the conventional coagulants, the newly-developed agent had such merits as suitability for wide pH range of wastewater, less sludge production, reutilization of the condensed sludge and low operation cost.
To remove effectively the pollutants from printing and dyeing wastewater, a new complex adsorptioncoagulation agent was developed and employed in dyeing wastewater treatment. The experimental results showed that better removals of COD, turbidity and color could be efficiently realized under the operating conditions of mixing at 150 r/min, reacting within 5 min and dosing at 15 g/L and 20 g/L, respectively. Combined with the settled sludge, the agent could be recycled for further adsorption and coagulation within 10 times. Compared to the conventional coagulants, the newly-developed agent had such merits as suitability for wide pH range of wastewater, less sludge production, reutilization of the condensed sludge and low operation cost.
关键词
废水处理
合成吸附
凝结物
污染物质
淤泥沉积
adsorption-coagulation agent
printing and dyeing wastewater
brine sludge
sludge recycle
