期刊文献+

动态聚类法在车辆实际行驶工况开发中的应用 被引量:27

Application of Dynamic Cluster to the Development of Vehicle Real World Driving Cycle
下载PDF
导出
摘要 在车辆实际行驶工况的开发过程中,为了得到相应交通特征道路上的实际行驶工况,需要将运动学片断按照道路交通特征分类。针对人工分类的不足,研究了动态聚类法在车辆实际行驶工况开发中的应用。以主成分分析得到的前3个主成分为聚类因子,并对运动学片段总体样本采用动态聚类法分类。研究表明:动态聚类法分类获得的2类运动学片段分类清晰,分别代表了车辆在交通拥挤和交通畅通的道路上的行驶特征。 In the course of the development of vehicle real world driving cycle, in order to develop vehicle real world driving cycle on the relevant traffic characteristic road, the kinematic sequences must be classified according to road traffic characteristic. Taking into account the deficiency of artificial classification, the purpose of this paper was to report the application of dynamic cluster to the development of vehicle real world driving cycle. The first three principal components, which came from principle component analysis (PCA), were regarded as the cluster factors, and using the method of the dynamic cluster, the kinematic sequence's overall sample was classified. The study showed two groups of kinematic sequences, which was obtained by classification, were very distinct and respectively represent travel characteristic that vehicle was on the crowded road and on the unblocked road.
出处 《武汉理工大学学报》 EI CAS CSCD 北大核心 2005年第11期69-71,81,共4页 Journal of Wuhan University of Technology
基金 国家"863"计划(2003AA501993)
关键词 动态聚类法 运动学片段 行驶工况 dynamic cluster kinematic sequence driving cycle
  • 相关文献

参考文献5

二级参考文献9

  • 1高飞,叶尚辉.基于特征的设计过程模型[J].计算机辅助设计与图形学学报,1995,7(1):69-74. 被引量:6
  • 2[1]Andre M. Driving Cycles Development: Characterization of the Methods [ J ]. SAE Technical Paper Series,1996, 961112.
  • 3[2]Andre M, Hickman A J, Hassel D, Joumard R. Driving Cycles for Emissions Measurements under European Conditions [J]. SAE Technical Paper Series,1995,950926.
  • 4[3]现代应用数学手册编委会.现代应用数学手册·概率论与随机过程卷[M].北京:清华大学出版社,1999:315-318.
  • 5[5]Dembski N, Guezennec Y, Soliman A. Analysis and Experimental Refinement of Real - Word Driving Cycles[J]. SAE Technical Paper Series, 2002,010069.
  • 6Brunetti G, Golob B. A Feature-based Approach Towards an Integrated Product Model Including Conceptual Design Information[J]. Computer-aided Design, 2000,32 (14) : 877-887.
  • 7Xue D, Dong Z. Coding and Clustering of Design and Manufacturing Features for Concurrent Design[J]. Computers in ustry, 1997,34 (1) : 139-147.
  • 8张翰,张永清,周雄辉.计算机辅助概念设计研究[J].机械科学与技术,1999,18(2):333-335. 被引量:18
  • 9孙正兴,张福炎.特征设计方法在方案设计中的应用初探[J].机械设计与研究,1999,15(1):21-24. 被引量:7

共引文献28

同被引文献165

引证文献27

二级引证文献237

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部