期刊文献+

菜籽与菜籽仁散粒体的压榨塑性模型 被引量:11

Plasticity model for pressing of rapeseed and rapeseed dehulled.
下载PDF
导出
摘要 进行了菜籽与菜籽仁散粒体侧限压榨下的应力应变关系、侧向压力试验.根据侧限压榨符合幂次硬化材料模型的试验结果,采用Doraivelu屈服准则,建立了基于增量理论的菜籽与菜籽仁散粒体侧限压榨塑性本构方程.结果表明,Doraivelu屈服准则可作为菜籽与菜籽仁压榨塑性模型的理论基础,压榨塑性模型能较好地描述菜籽与菜籽仁散粒体的塑性变形. The experiments for stress-strains and lateral pressure of rapeseed and rapeseed dehulled by uniaxial pressing were carried out. The results show that rapeseed and rapeseed dehulled conform to the model of power hardening. By using of Doraivelu's yield criterion, plasticity constitutive equations were developed. Greatest relative deviation below 11.44% and 1.1 % between the experimental and predicted values of the strains indicate that the plasticity constitutive model can simulate plasticity deformation of rapeseed and rapeseed dehulled well, Doraivelu's yield criterion can be used as theoretical basis for plasticity model of rapeseed and rapeseed dehulled.
出处 《浙江大学学报(农业与生命科学版)》 CAS CSCD 北大核心 2005年第6期802-806,共5页 Journal of Zhejiang University:Agriculture and Life Sciences
基金 湖北省教育厅重点科研计划资助项目(2002A01008) 武汉工业学院重点科研基金资助项目
关键词 屈服准则 塑性模型 本构方程 菜籽 菜籽仁 yield criterion plasticity model constitutive equations rapeseed rapeseed dehulled
  • 相关文献

参考文献6

二级参考文献14

  • 1郭康权,赵东,查养社,柴春祥.植物材料压缩成型时粒子的变形及结合形式[J].农业工程学报,1995,11(1):138-143. 被引量:40
  • 2任学平.粉末金属屈服准则和流动应力研究(学位论文)[M].哈尔滨:哈尔滨工业大学,1989..
  • 3姜奎华.塑性加工中粉锻技术理论的几个问题[J].锻压技术,1988,(2):12-17.
  • 4汪涛 王仲仁.关于滑移线理论推广应用于轴对称变形问题的研究.第二届塑性加工理论学术会议论文[M].,1981..
  • 5刘心宇,中南工业大学学报,1997年,28卷,21期,156页
  • 6任学平,粉末金属屈服准则和流动应力研究,1989年
  • 7刘心宇,张继忠,程仕平,周越辉.纯铝(L_2)高温本构方程的研究[J].中南工业大学学报,1997,28(2):156-159. 被引量:5
  • 8王仲二,袁祖培等 译,顾震隆等.工程塑性理论及其在金属成形中的应用[M]机械工业出版社,1983.
  • 9[日]山口梅太郎,[日]西松一 著,黄世衡.岩石力学基础[M]冶金工业出版社,1982.
  • 10汪俊,罗思东,李从心.金属粉末零件压制过程有限元模拟的研究[J].中国机械工程,1997,8(4):40-43. 被引量:11

共引文献61

同被引文献87

引证文献11

二级引证文献43

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部