期刊文献+

碳气凝胶的电学性能和嵌锂机理研究 被引量:3

Electrical Property and Li Intercalation of Carbon Aerogeis
下载PDF
导出
摘要 以间苯二酚和甲醛为前驱体,通过溶胶-凝胶法,经1050℃高温碳化制备碳气凝胶材料。用XRD、SEM对材料的微观结构进行分析表征,通过恒流充放电,循环伏安法对材料的电学性能进行研究。联系材料的微观结构和电学性能,对锂离子在碳气凝胶中的镶嵌过程和机理进行分析,发现微孔和高电位充放电平台有很大关系。 Carbon aerogels are prepared by pyrolysis of the RF aerogels derived from resorcinol and formaldehyde through sol-gel process. The structure and electrical properties are investigated by SEM, XRD, constant current charge-discharge and cyclic vohammetry. By comparing the structure and electrical properties of different samples, the electrical properties and Li intercalation of the carbon aerogels are studied. The study indicates that the nano-porcs of carbon aerogels have close relationship with the high voltage platform,
出处 《材料导报》 EI CAS CSCD 北大核心 2005年第F05期271-273,共3页 Materials Reports
基金 上海市自然科学基金项目(02ZE14101) 上海市纳米科技与产业发展促进中心项目(0352nm022,0352nm043)
关键词 碳气凝胶 锂离子电池 负极材料 carbon aerogels, Li-ion batteries, anode material
  • 相关文献

参考文献6

  • 1Winter M, Besenhard J O, Spahr M E, et al. Insertion electrode materials for rechargeable lithium batteries [J]. Adv Mater,1998,10 (10) :725.
  • 2Fischer J E. Chemical physics of intercalation [M]. Plenum:New York, 1987.59.
  • 3Nicola H, Ulrich S. Aerogels-airy materials: chemistry, structure and properties [J]. Angew Chem Int Ed, 1998,37:22.
  • 4张栓勤 王珏 朱基千.纳米多孔电极材料碳气凝胶[A]..97中国材料研讨会论文集[C].北京:冶金工业出版社,1997.1108.
  • 5Takami N, Satoh A, Ohsaki T, et al. Lithium insertion and extraction for high-capacity disordered carbons with large hystersis [J]. Electrochim Acta, 1997,42(16) :2537.
  • 6Toshihide Horikawa, Jun ichi Hayashi, Katsuhiko Muroyama.Controllability of pore characteristics of resorcinol-formaldehyde carbon aerogel [J]. Carbon,2004,42(8-9): 1625.

同被引文献49

  • 1聂茶庚,龚正良,孙岚,左娟,赖跃坤,林昌健.软化学法合成TiO_2(B)纳米带及其储锂性能研究[J].电化学,2004,10(3):330-333. 被引量:12
  • 2夏三宇,陈晓红,宋怀河.炭气凝胶微球的制备及在锂离子电池负极材料中的应用[J].北京化工大学学报(自然科学版),2006,33(2):46-49. 被引量:5
  • 3陈野,舒畅,张春霞,葛鑫,张密林.氧化镍的合成及其超级电容性能[J].应用化学,2007,24(8):873-877. 被引量:6
  • 4Winter M,Besenhard J O,Spahr M E,et al.Insertion electrode materials for rechargeable lithium batteries[J].Adv.Mater,1998,10:725.
  • 5Idota Y,Kubota T,Matsufuji A,et al.Tin-based amorphous oxide:a high capacity lithium-ion storage material[J].Science,1997,276:1395~1397.
  • 6Poizot D,Laruelle S,Grugeon S,et al.Nano-sized transition-m etal oxides as negative-electrode material for lithium-ion batteries[J],Nature,2000,407:496~499.
  • 7Tomoko Kasuga.Formation of titanium oxide nanotubes using chemical treatments and their characteristic properties[J].Thin Solid Films,2005,10:141~145.
  • 8Wilhelm O,Pratsinis S E.Electrochemical performance of granulated titania nanoparticles[J].Journal of Power Sources,2004,134:197~201.
  • 9Gao Xue-ping,Zhou Huai-yong.Preparation and Electrochemical characterization of anatase nanorods for lithium-Inserting electrode material[J].Phys.chem,2004,108:2868~2872.
  • 10Pekala R W. Low density resorcinol-formaldehyde aerogels. US Patent, 4873218, 1989.

引证文献3

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部