摘要
本文介绍了采用生物接触氧化法处理染色废水的设计与工程试运转.运行结果表明,当废水原水COD_(Cr)平均浓度为546mg/L、色度为448倍时,处理COD_(Cr)去除率68%,色度去除率86%,出水能达标排放.
The design and pilot run of a contact-oxidation facility to treat print-dyeing wastewater are presented. The results show that the treated wastewater is quit good to meet the requirement of discharge standard. The removal ratios of 68% and 86% are obtained for CODCr and colour index while their contents in the influent average 546mg/ 1 and 448 respectively.
出处
《给水排水》
CSCD
1996年第3期24-26,共3页
Water & Wastewater Engineering