期刊文献+

真空开关重击穿现象的模拟试验研究 被引量:3

Analog Tests on Vacuum Interrupter Restrike
下载PDF
导出
摘要 在试验室对真空开关开断容性负载时重击穿现象进行了模拟试验研究,用特殊的合成试验回路对比测量了三种常用触头材料的性能,分析了电流老炼使重击穿概率下降的规律。 Analog tests on capacitance switching with vacuum interrupters are carried on in lab. A special synthetic circuit is used in tests to compare the re-striking properties of different contact material. The restrike probability after arcing, which is under the effect of current conditioning,is studied.
机构地区 西安交通大学
出处 《高压电器》 CAS CSCD 北大核心 1996年第5期9-13,共5页 High Voltage Apparatus
关键词 真空断路器 击穿 模拟试验 断路器 vacuum interrupter,restrike,analog test
  • 相关文献

参考文献2

二级参考文献3

  • 1张新平,1991年
  • 2胡汉起,金属凝固原理,1990年
  • 3杨津基,气体放电,1983年

共引文献2

同被引文献27

  • 1廖敏夫,段雄英,邹积岩.单断口和三断口串联真空灭弧室绝缘击穿统计特性[J].中国电机工程学报,2007,27(12):97-102. 被引量:25
  • 2GB 1984—2014高压交流断路器[S].2014.
  • 3IEC 62271-100—2012 High-voltage switchgear and con-trolgearPart 100: High-voltage alternating-current circuitbreakers[S].2012.
  • 4GB/T 2900.2.0—1994电工术语高压开关设备和控制设备[S]. 1994.
  • 5徐国政,张节容,钱家骊,等.髙压断路器[M].北京:清华大学出版社,2000.
  • 6尚振球,冯汝明,许晓勤.真空断路器NSDD问题的初步研究[J].髙压电器,1986,22(4):13-17.
  • 7GREENWOOD A. Vacuum switchgear[M]. Stevenage:TheInstitution of Electrical Engineers, 1994.
  • 8SCHLAUG M’FALKINGHAM L T. Non-sustained disrup-tive discharges (NSDD)-a new investigation method leadingto increased understanding of this phenomena[C]//Proceed-ing of 19th Institute Symposium on Discharges and Electri-cal Insulation in Vacuum. Xi’an:IEEE,2000:490*493.
  • 9BERNAUER C,RIEDER W,KNY E_ Non-sustained dis-ruptive discharges in vacuum circuit-breakers[C]//Proceed-ings of 13th Institute Symposium on Discharges and Elec-trical Insulation in Vacuum.Paris:IEEE, 1988:338-340.
  • 10CHALY A M,DENISOV L V,POLUYANOV V N,et al.Peculiarities of non-sustained disruptive discharges atinterruption of cable/line charging current [C]//Proceedingsof 13th Institute Symposium on Discharges and ElectricalInsulation in Vacuum.Paris:IEEE, 1988:335-337.

引证文献3

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部