摘要
Tundish is the last refractory vessel in the steelmaking process. The fluid flow phenomena in tundish have a strong influence on the separation of non-metallic inclusions. The dispersive bubble wall （DBW） is a new method in tundish metallurgy. A water model of a multi-strand tundish has been set up based on the Froude number and Reynold number similarity criteria. The effect of DBW＋weir on the flow pattern has been studied. The results show that this new structure of DBW＋weir is beneficial not only to uniform the temperature among different submerge entry nozzles but also to separate non-metallic inclusions from liquid steel. The DBW can capture the particles of non-metallic inclusions and make them float up to the surface.
Tundish is the last refractory vessel in the steelmaking process. The fluid flow phenomena in tundish have a strong influence on the separation of non-metallic inclusions. The dispersive bubble wall （DBW） is a new method in tundish metallurgy. A water model of a multi-strand tundish has been set up based on the Froude number and Reynold number similarity criteria. The effect of DBW＋weir on the flow pattern has been studied. The results show that this new structure of DBW＋weir is beneficial not only to uniform the temperature among different submerge entry nozzles but also to separate non-metallic inclusions from liquid steel. The DBW can capture the particles of non-metallic inclusions and make them float up to the surface.
基金
This work is financially supported by the National Natural Science Foundation of China (No. 50274007).
