摘要
以活化剂浓度、热压时间及含水率等工艺参数为因子,用正交试验法对无胶胶合板的制造工艺进行研究。结果表明,影响无胶胶合板胶合强度的主要因素是活化剂浓度,热压时间、含水率为次要因素,同时还得到了较优的工艺参数。
The research was based on the factors of activated chemicals＇ concentration, hot-pressing time and moisture content and so on, adopting the orthogonal test to study the manufacture technology of the self-bonding plywood. It was demonstrated that the main influencing factor is the concentration of the activated chemicals, the hot-pressing time and the moisture content of the panel are the secondary factor. The optimized treating condition affecting the results was also gained.
出处
《林业机械与木工设备》
2006年第2期13-15,共3页
Forestry Machinery & Woodworking Equipment
关键词
无胶胶合
胶合板
制造工艺
self-bonding
plywood
manufacture technology
