期刊文献+

63Sn-37Pb钎料室温单轴循环时的变形行为 被引量:5

Deformation Behaviors of 63Sn-37Pb Solder Alloy under Uniaxially Cyclic Loading at Room Temperature
下载PDF
导出
摘要 在室温下通过实验研究了63Sn-37Pb钎料合金在具有不同保持时间、应变率、应变幅值、应变-时间、加载波形及加载历史下的循环变形行为.研究表明:该钎料具有明显的应变率敏感性;其单轴循环变形的瞬态行为受到保持时间、加载波形以及应变幅值的影响;该钎料合金循环变形行为的加载历史依赖性不明显. The uniaxial cyclic deformation behaviors of 63Sn-37Pb solder alloy were experimentally investigated under different dwell times, strain rates, strain amplitudes, strain-time loading waveforms and loading histories. The study shows that the solder alloy has a significant strain-rate sensitivity, its instant deformation behavior under uniaxial cyclic loading is dependent on dwell time, loading waveform and strain amplitude, but the dependence of the cyclic deformation behavior on loading history is not significant.
出处 《西南交通大学学报》 EI CSCD 北大核心 2005年第6期774-778,共5页 Journal of Southwest Jiaotong University
基金 国家自然科学基金资助项目(10372086) 留学回国人员基金资助项目
关键词 粘塑性 钎料合金 保持时间 应变率 循环变形 viscoplasticity solder alloy dwell time strain rate cyclic deformation
  • 相关文献

参考文献17

  • 1Busso E P,Kitano M,Kumazawa T.A visco-plastic constitutive model for 60/40 tin-lead solder used in IC package joints[J].ASME Journal of Engineering Materials and Technology,1992,114:331-337.
  • 2Solomon H D.Creep,strain rate sensitivity and low cycle fatigue of 60/40 solder[J].Brazing Soldering,1986,11:8-75.
  • 3Ren W,Qian Z,Lu M,et al.Investigation of a new lead free solder alloy using thin strip specimens[J].ASME Journal of Electronic packaging,1999,121:271-274.
  • 4Shi X Q,Zhou W,Pang H L J,et al.Effect of temperature and strain rate on mechanical properties of 63Sn/37Pb solder alloy[J].ASME Journal of Electronic Packaging,1999,121:179-185.
  • 5Shi X Q,Pang H L J,Zhou W,et al.Low cycle fatigue analysis of temperature and frequency effects in eutectic solder alloy[J].International Journal of Fatigue,2000,22:217-228.
  • 6Stephens J J,Frear D R.Time-dependent deformation behavior of near-eutectic 60Sn-40Pb solder[J].Metallurgical and Materials Transactions A,1999,30(A):1 301-1 313.
  • 7Vianco P T,Burchett S N,Neilsen M K,et al.Coarsening of the Sn-Pb solder microstructure in constitutive model-based predictions of solder joint thermal mechanical fatigue[J].Journal of Electronic Materials,1999,28(11):1 290-1 298.
  • 8Yang X J,Chow C L,Lau K J.A time-dependent cyclic failure model of 63Sn/37Pb solder alloy[J].International Journal of Fatigue,2003,25(6):533-546.
  • 9Yang X J,Chow C L,Lau K J.A unified viscoplastic fatigue damage model for 63Sn-37Pb solder alloy under cyclic stress control[J].International Journal of Damage Mechanics,2003,12(5):225-245.
  • 10刘晓波,王国勇.表面封装用无铅软钎料的接头强度及熔点范围的研究[J].电子元件与材料,2002,21(4):18-19. 被引量:9

二级参考文献4

  • 1王莉 范富华 等.B-P方程对Sn60Pb40合金的单向力学响应的预测[J].焊接学报,1997,18:39-43.
  • 2王莉,焊接学报,1997年,18卷,39页
  • 3Pao Y H,ASME J Electronic Packaging,1993年,115卷,6期,147页
  • 4马鑫,王莉,方洪渊,钱乙余.Sn-Pb共晶钎料合金的Bodner-Partom本构方程[J].应用力学学报,1998,15(2):87-90. 被引量:6

共引文献47

同被引文献68

引证文献5

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部