期刊文献+

Biodegradation of 2,6-ditert-butylphenol by immobilized microorga- nism strains

Biodegradation of 2,6-ditert-butylphenol by immobilized microorga- nism strains
下载PDF
导出
摘要 2,6-Ditert-butylphenol (2,6-DTBP) is a major organic contaminant presenting in acrylic fiber manufacturing wastewaters. This compound is of high bio-resistance due to its complex structure which consists of one phenol group and two highly branched tert-butyl groups. This research attempted to improve the biodegradation efficiency of 2,6-DTBP through various strain immobilization methods. The stratified immobilization can settle oxygen transmission in the single microorganism immobilization, and can realize two-process reaction in the single device by choosing two symbiotic microorganisms. Two effective strains, named F-1-4 and F-3-4, which were screened out in our previous work, were used to degrade 2,6-DTBP after being immobilized in calcium alginate gel. Results indicate that the substrate removal efficiency of various immobilization methods follows the order: stratified 〉 single F-3-4 〉 mixed ≈single F-1-4. The immobilized biodegradation capacity was higher than the free one. After an incubation time of 12 d, 91% of 2,6-DTBP could be degraded by the stratified immobilization method, compared to 79% achieved by the mixed immobilization method with an initial 2,6-DTBP concentration of 100 mg/L. The stratified immobilization satisfies the oxygen demand nature of the aerobic F-3-4 and the facultative F-1-4, thus yielding the highest degradation efficiency. Both the outer layer strain F-3-4 and the inner layer strain F-1-4 can grow actively on the substrate of 2,6-DTBP, as illustrated by SEM images. This study shows that the highly bio-refractory compound, 2,6-DTBP, can be effectively degraded using appropriately inunobilized microorganism strains. 2,6-Ditert-butylphenol (2,6-DTBP) is a major organic contaminant presenting in acrylic fiber manufacturing wastewaters. This compound is of high bio-resistance due to its complex structure which consists of one phenol group and two highly branched tert-butyl groups. This research attempted to improve the biodegradation efficiency of 2,6-DTBP through various strain immobilization methods. The stratified immobilization can settle oxygen transmission in the single microorganism immobilization, and can realize two-process reaction in the single device by choosing two symbiotic microorganisms. Two effective strains, named F-1-4 and F-3-4, which were screened out in our previous work, were used to degrade 2,6-DTBP after being immobilized in calcium alginate gel. Results indicate that the substrate removal efficiency of various immobilization methods follows the order: stratified 〉 single F-3-4 〉 mixed ≈single F-1-4. The immobilized biodegradation capacity was higher than the free one. After an incubation time of 12 d, 91% of 2,6-DTBP could be degraded by the stratified immobilization method, compared to 79% achieved by the mixed immobilization method with an initial 2,6-DTBP concentration of 100 mg/L. The stratified immobilization satisfies the oxygen demand nature of the aerobic F-3-4 and the facultative F-1-4, thus yielding the highest degradation efficiency. Both the outer layer strain F-3-4 and the inner layer strain F-1-4 can grow actively on the substrate of 2,6-DTBP, as illustrated by SEM images. This study shows that the highly bio-refractory compound, 2,6-DTBP, can be effectively degraded using appropriately inunobilized microorganism strains.
出处 《Journal of Environmental Sciences》 SCIE EI CAS CSCD 2006年第2期369-372,共4页 环境科学学报(英文版)
基金 TheN ationalNaturalScienceFoundationofChina(N o.50008011),theH i-TechResearchandDevelopm entProgram (863)ofChina(N o.2004A A649310),theK eyTechnologiesResearchandDevelopm entProgram ofChina (N o.2003BA808A 17)andtheProgram ofSTCSM (N o.05Q M X1453)
关键词 BIODEGRADATION 2 6-ditert-butylphenol immobilization microorganism strains biodegradation 2,6-ditert-butylphenol immobilization microorganism strains
  • 相关文献

参考文献1

二级参考文献16

  • 1Arvin E, Harremoēs P, 1990. Concepts and models for biofilm reactor performance[J]. Wat Sci Tech, 22(1/2) : 171--192.
  • 2Bishop P, 1997. Biofilm structure and kinetics[J]. Wat Sci Tech, 36(1): 287--294.
  • 3Bishop P, Rittmann, 1995. Modeling heterogeneity in biofilms[J]. Wat Sci Tech, 32(8): 263--265.
  • 4Collins A G, 1988. Fixed-film biological nitrification of a strong industrial waste[J]. J WPCF, 60(4) : 499--504.
  • 5Furumai H, Rittmann B, 1994. Interpretation of bacterial activities in nitrification filters by a biofilm model considering the kinetics of soluble microbial products[J]. War Sci Tech, 30(11): 147--156.
  • 6Gujer W, Wanner O, 1990. Modeling mixed population biofilms[M], ln: Biofilms. New York: John Wiley & Sons, Inc. 397--443.
  • 7Josephson J, 1982. Fixed-film biological process[J]. Environ Sci Tech, 16(7) : 380A--384A.
  • 8Kissel J, McCarty P, 1984. Numerical simulation of a mixed-culture biofilm[J]. J Environ Eng Div ASCE, 110: 393--411.
  • 9Lewandowski Z, Stoodley P, Altobelli Set al., 1994. Hydrodynamics and kinetics in biofilm systems-recent advances and new problems[J].Wat Sci Tech, 29( 10/11 ) : 223--229.
  • 10Noguera D, Okabe S, 1999. Picioreanu biofilm modeling: present status and future directions[J]. Wat Sci Tech, 39(7) : 273--278.

共引文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部