摘要
阐述了泡沫体系的稳泡机理,采用物理发泡方法,研究了不同种类、含量的泡沫稳定剂对丙烯酸酯胶黏剂发泡体系的影响。结果表明,有机硅AK8805对该体系的效果最好。当发泡剂含量为15%、有机硅AK8805的含量为9%时,该发泡体系的发泡倍率可达到43.6 ml.g-1。
The mechanism of foam stabilization for foaming system was discussed in this paper,The effects of different foam stabilizer and their dosage on acrylate adhesive foaming system was investigated by physically quick - foaming method,The results showed that silicone AK8805 was the most effective foam stabilizer for the system. When the amount of foaming agent was 15 % and the content of silicone AK8805 was 9 % the foamability of the foaming system could reach 43.6 ml·g^-1.
出处
《化学与粘合》
CAS
2006年第2期128-130,共3页
Chemistry and Adhesion
