期刊文献+

氧乙炔喷焊工艺参数对喷焊层结合强度影响的分析 被引量:3

Analysis of Binding Strength of Spray Weld Coating Influenced by the Technological Parameter of Oxyacetylene Spraying
下载PDF
导出
摘要 通过对氧乙炔喷焊工艺参数进行优选,找出其中的规律性,以提高氧乙炔喷焊的结合强度。 In this article, the author would find out some reguarity to improve binding strength of oxyacetylene spraying through optimum selecting certain parameter of the technology standard of oxyacetylene spraying by experiments:
作者 刘曦
机构地区 江苏理工大学
出处 《中国机械工程》 EI CAS CSCD 北大核心 1996年第3期96-98,共3页 China Mechanical Engineering
关键词 氧乙炔喷焊 工艺参数 结合强度 焊接 oxyacetylene spraying technological parameter binding strength fused spray deposit surface roughening
  • 相关文献

参考文献3

  • 1团体著者,氧乙炔焰金属粉末喷涂及喷焊,1985年
  • 2团体著者,焊接方法及设备之四.钎焊和胶接,1982年
  • 3团体著者,常用数理统计方法,1979年

同被引文献29

  • 1李平,邓永瑞.钛合金表面激光熔覆氧化锆陶瓷涂层的显微组织[J].稀有金属材料与工程,1995,24(4):19-24. 被引量:12
  • 2Kathy W.The Use of Titanium for Medical Application in USA[J].Materials Science & Engineering,1996,A213:134-136.
  • 3Budinski K G.Tribological Properties of Titanium Alloys[J].Wear,1991,151:203-213.
  • 4Kim H J,Hwang S Y,Lee C H,et al.Assessment of Wear Performance of Flame Sprayed and Fused Ni-based Coating[J].Surface & Coating Technology,2003,172:262-269.
  • 5Kahraman N,Behcet G.Abrasive Behavior of Powder Flame Sprayed Coatings on Steel Substrates[J].Materials & Design,2002,23:721-725.
  • 6许晓静 王宏宇 陈康敏.钛合金表面耐磨涂层的火焰喷焊方法 中国.200410065213.9[P].[P].2004-11-02.1-9.
  • 7Kathy W. The use of titanium for medical application in USA[J]. Mater Sci Eng A, 1996,A213(12):134-136.
  • 8Budinski K G. Tribological properties of titanium alloys[J]. Wear, 1991, 151(2): 20a-21a.
  • 9Molinari A. Dry sliding wear mechanisms of the Ti6Al-4V alloy[J]. Wear,1997,208(3):105-112.
  • 10Kim D H. Characterization of diamond-like carbon films deposited on commercially pure Ti and Ti-6Al4V alloy[J]. Mater Sci Eng C, 2002, C22(1):9-14.

引证文献3

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部