摘要
采用等径角挤压(ECAP)对铜铬合金(Cu/3．75%Cr)进行加工,并进行了金相及扫描电镜分析。结果表明：ECAP导致材料晶粒细化十分明显,铬在合金中仍以颗粒状均匀分布。同时,ECAP加工后铜铬合金硬度和抗拉强度也有很大提高。
The method of equal channel angular pressing（ECAP） was used in the manufacture process of the alloy CwCr （Cu/3. 75%Cr）. The metallographic and SEM examination were performed. The results indicate that the grain size was obviously refined, and the Cr precipitates in the Cu-Cr were distributed well. The hardness and tensile strength of the copper alloy increased a lot.
出处
《机械工程材料》
CAS
CSCD
北大核心
2006年第3期51-53,67,共4页
Materials For Mechanical Engineering
基金
上海市科委纳米基金(0432nm036)
