期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

TOOTH CONTACT ANALYSIS OF CONICAL INVOLUTE GEARS 被引量：6

TOOTH CONTACT ANALYSIS OF CONICAL INVOLUTE GEARS
下载PDF
导出
摘要 The mathematical model of conical involute gears is developed based on the theory of gearing and the generating mechanism. Tooth contact analysis （TCA） is performed to examine the meshing and bearing contact of the conical involute gear pairs with intersected and crossed axes. In addition, the principal directions and curvatures of the gear surfaces are investigated and the contact ellipses of the mating tooth surfaces are also studied. Finally, the numerical illustrative examples are provided to demonstrate the computational results, test gears are made for tooth-bearing tests, and the conclusion is verified that the theory has the applicability. The mathematical model of conical involute gears is developed based on the theory of gearing and the generating mechanism. Tooth contact analysis （TCA） is performed to examine the meshing and bearing contact of the conical involute gear pairs with intersected and crossed axes. In addition, the principal directions and curvatures of the gear surfaces are investigated and the contact ellipses of the mating tooth surfaces are also studied. Finally, the numerical illustrative examples are provided to demonstrate the computational results, test gears are made for tooth-bearing tests, and the conclusion is verified that the theory has the applicability.
作者 HE Jingliang WU Xutang CUI Yahui NIE Gang
机构地区 Department of Mechanical Engineering School of Mechanical Engineering School of Mechanical Engineering School of Mechanical Engineering
出处 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2006年第1期105-108,共4页 中国机械工程学报（英文版）
关键词 Conical involve gears Tooth contact analysis（TCA） Computer aided analysis Conical involve gears Tooth contact analysis（TCA） Computer aided analysis
分类号 TH132.41 [机械工程—机械制造及自动化]
  • 相关文献

参考文献12

  • 1BEAM A S.Beveloid gearing[J].Machine Design,1954,26(12):220-238.
  • 2PURKISS S C.Conical involute gears[J].Machinery,1956,89(21):1465-1467.
  • 3MITOME K.Conical involute gear-development,application and view of tomorrow[C]// ASME 2003 Design Engineering Technical Conferences,Chicago,USA,2003:771-778.
  • 4MITOME K.Conical involute gear (Part 3:Tooth action of a pair of gears)[J].Bull.JSME,1985,28(245):2757-2764.
  • 5MITOME K,TAKASHI Y.Design of conical involute gear engaged with profile shifted spur gear on intersecting shafts[J].Trans.Jpn.Soc.Mech.Eng,1996,62(598):2 436-2 441.
  • 6MITOME K.Design of miter conical involute gears based on tooth bearing[J].JSME Int.J,1995,38 (2):307-311.
  • 7KOMATSUBARA H,MITOME K,OHMACHI T.Development of concave conical gear used for marine transmissions (1st Report)[J].JSME Int.J,2002,45(1):371-377.
  • 8KOMATSUBARA H,MITOME K,OHMACHI T.Development of concave conical gear used for marine transmissions (2nd Report)[J].JSME Int.J,2002,45(2):543-550.
  • 9LI Huamin,HAN Yuanging,WANG Zhixing.Geometric principle and calculation of involute gear[M].Beijing:China Machine Press,1985.
  • 10贺敬良,吴序堂.交错轴渐开线锥形齿轮副啮合原理研究[J].机械工程学报,2004,40(4):81-84. 被引量：10

二级参考文献10

  • 1Beam A S. Beveloid gearing. Machine Design, 1954, 26 (12):220-238
  • 2Mitome K. Conical involute gear (Part 3:tooth action of a pair of gears). Bull. JSME, 1985, 28(245):2 757-2 764
  • 3三留謙一 山崎.転位平歯車と交差軸上でかみあう円すい形インボリュート歯車の設計法[J].日本機械学会論文集,1996,62(598):2436-2441.
  • 4Jesper B.Analytical geometry of straight conical involute gears. Mechanism and Machine Theory, 2002, 37:127～141
  • 5Komatsubara H, Mitome K, Ohmachi T. Development of concave conical gear used for marine transmissions (1st Report, principle of generating helical concave conical gear). JSME Int. J., 2002,45(1):371～377
  • 6Komatsubara H, Mitome K, Ohmachi T. Development of concave conical gear used for marine transmissions (2nd Report, principal normal radii of concave conical gear and design of a pair of gears). JSME Int. J., 2002, 45(2):543～550
  • 7李华敏, 韩元莹, 王知行. 渐开线齿轮的几何原理与计算. 北京:机械工业出版社, 1985
  • 8李瑰贤. 变齿厚渐开线齿轮传动. 现代机械传动手册,第2版. 北京:机械工业出版社,2002
  • 9Mitome K. Design of nonintersecting-nonparallel-axis conical involute gear. JSME Int. J., 1991, 34(2):265～270
  • 10吴序堂. 齿轮啮合原理. 北京:机械工业出版社, 1982

共引文献9

同被引文献30

  • 1李瑰贤,温建民,刘福利,李笑.交错轴非渐开线变厚齿轮齿形误差与齿向误差的分析[J].南京理工大学学报,2004,28(6):585-589. 被引量：5
  • 2周晖,温庆平,张伟文.谐波减速器在空间飞行器中的应用[J].真空与低温,2004,10(4):187-192. 被引量：25
  • 3刘文芝,张乃仁,张春林,赵永忠.谐波齿轮传动中杯形柔轮的有限元计算与分析[J].机械工程学报,2006,42(4):52-57. 被引量：29
  • 4王长明,阳培,张立勇.谐波齿轮传动概述[J].机械传动,2006,30(4):86-88. 被引量：36
  • 5BAUMGARTNER Eric T,BONITZ Robert G,MELKO Joseph P,et al.The mars exploration rover instrument positioning system[C]// Proceedings-2005 IEEE Aerospace Conference,March 5-12,2005,Big Sky,MT,United States,Big Sky:Institute of Electrical and Electronics Engineers Computer Society,2005:1559295.
  • 6JOHN Sprovieri.Harmonic drives provide high torque without backlash[J].Assembly,2005,48(2):8.
  • 7TUTTLE Timothy D,SEERING Warren.Modeling a Harmonic drive gear transmission[C]// Proceedings-IEEE International Conference on Robotics and Automation,May 2-6,1993,Atlanta,GA,USA.Piscataway,NJ:IEEE,1993,2:624-629.
  • 8齿轮手册编委会.齿轮手册[M].北京:机械工业出版社,2005:2-143-2-164.
  • 9Mitome K. Table sliding taper hobbing of conical gear using cylindrical hob, part 1: theoretical analysis of table sliding taper hobbing [J]. Transactions of the ASME, 1981,103 (4) : 46-451.
  • 10Mitome K. Table sliding taper hobbing of conical gear using cylindricalhob, part2 : hobbing of conical involute gear [J]. Transactions of the ASME, 1981, 103 (4) : 542-455.

引证文献6

二级引证文献63

Chinese Journal of Mechanical Engineering
2006年 第1期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部