期刊文献+

工业通风机性能测试中喷嘴的选择 被引量:3

Selection of Nozzle in Performance Test for Industrial Fan
下载PDF
导出
摘要 采用进气风室试验装置对离心风机进行性能测试,研究单喷嘴和组合喷嘴测试同一风机所导致的测量结果偏差大小及其分布规律。试验结果表明:选择不同的喷嘴会导致同一流量下风机的静压和风机的效率产生偏差,喷嘴的流通面积小,则静压测试结果偏大,风机效率偏高。 The performance of centrifugal fan using the air in plenum to test was tested, the magnitude and distribute of differences caused was studied by using different nozzles-a single nozzle or combined nozzles when test the same centrifugal fan. The result shows that it will lead to the difference of static pressure and efficiency of fan at the identical flow rate when using different nozzles. If the flow area of nozzle is smaller, the measured static will be higher, and the measured efficiency will be higher too.
机构地区 上海理工大学
出处 《流体机械》 CSCD 北大核心 2006年第3期39-41,23,共4页 Fluid Machinery
关键词 喷嘴 性能测试 风室 通风机 对比 nozzle performance test plenum fan contrast
  • 相关文献

参考文献5

二级参考文献4

  • 1诸静.模糊控制原理与应用[M].北京:机械工业出版社,1999..
  • 2ISO 5801-1997 Industrial fans Performance testing using standardized airways.
  • 3灵澄.PC总线工业控制系统精粹.清华大学出版社,1998.
  • 4殷忠民,茅忠明,周忠.大型通风机性能自动测试装置的研制[J].流体机械,2000,28(3):8-11. 被引量:8

共引文献7

同被引文献7

引证文献3

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部