摘要
用程序升温热重法对-βCD与1-MCP包结物的热分解动力学进行了研究,考察了升温速率对TG/DTG谱图的影响,并用单一升温速率法和多个升温速率组合法分别作了动力学分析.结果表明:动力学参数(Tm和(dα/dT)m)均随着升温速率的升高而增大,两种计算方法得到的动力学参数是不同的,单一升温速率法计算出的E和A值遵循关系式:lnA=0.1059E+1.013,即存在动力学补偿效应;多个升温速率组合法对E的计算,则依赖于升温速率的组合.
The inclusion complexes of β-CD and 1-MCP were studied by temperature-programmed themogravimetry, from which the TG/DGT spectra were obtain at a temperature rising rate 10-40 K/min. The DTG parameters, Tm and (dα/ dT)m, and kinetic parameters were calculated from Freeman-Carroll method and Kissinger method, respectively, both were affected by temperature rising rate. The results showed that the thermal kinetic parameters Tm and (dα/dT)m increase linearly with the rate. From the results by Freeman-Carroll method, it can be found that there is a "kinetic compensation effect" which reveals a linear relationship: lnA = 0. 105 9E + 1.013. However, if by Kissinger method, several temperature rising rates are used to calculate the activation energy depending on how to combine these rates together.
出处
《东北大学学报(自然科学版)》
EI
CAS
CSCD
北大核心
2006年第4期469-472,共4页
Journal of Northeastern University(Natural Science)
基金
国家高技术研究发展计划项目(2002AA340640)
关键词
β-环糊精
1-甲基环丙烯
升温速率
热分解动力学
程序升温热重法
β-cyclodextrin(β-CD)
1-methyleyclopropene( 1-MCP)
temperature rising rate
thermal decomposition kinetics
temperature-programmed t hermogravimetry