摘要
采用预乳化全部滴加的聚合工艺,制备乳液型丙烯酸酯类水性台板胶。为此,研究单体、乳化剂、引发剂和分子量调节剂用量对台板胶性能的影响。试验表明,在采用混合共聚单体时,通过预乳化全滴加工艺,可使单体混合均匀,有利于乳液正常进行聚合,以及产品性能稳定。
merization process of pre-emulsifying and whole dropping. The influence of dosage of monomer, emulsifier, initiator, and molecular weight modifier to the property of glueing agent was researched. Based on trials, it is found that pre-emulsifying and whole dropping process can mix monomer evenly, and be of benefit to emulsion polymerization and stable property of the products.
出处
《印染》
北大核心
2006年第8期31-33,共3页
China Dyeing and Finishing
关键词
印花
粘合剂
乳化
printing
adhesive
emulsification
