摘要
本文介绍了用三氧化钨和硫化氢制取固体润滑剂二硫化钨的试验情况以及所得样品对改善复合钙基润滑脂性能的测试结果。
出处
《辽宁化工》
CAS
1996年第1期45-47,共3页
Liaoning Chemical Industry
同被引文献18
-
1陈祖熊.二维无机功能材料[J].功能材料,1994,25(3):280-284. 被引量:5
-
2天津化工研究院等.无机盐工业手册.北京:化学工业出版社,1988,538-541
-
3S V Prasad, N T McDevitt and J S Zabinski. Tribology of tungsten disulfide-nanocrystalline zinc oxide adaptive lubricant films from ambient to 500 ℃[J]. Wear, 2000,237(2):186-196.
-
4G Alonso,V Petranovskii,et al. Preparation of WS2 catalysts by in situ deco mposition of tetraalkylammonium thiotungstates[J].Applied catalysis General, 2000,197(1):87-97.
-
5G Alonso,J Yang,M H Siadati. Synthesis of tetraalkylammonium thiometallates in aqueous solution[J].Inorganica chimica acta, 2001,325(1-2):193 - 197.
-
6周世桂.稀有金属信息网讯,1993,5.
-
7L Rapoport,V Leshchinsky. Mechanism of friction of fullerenes[J].Industrial Lubrication & Tribology,2002,54(4):171-176.
-
8L Rapoport,M Lvovsky,et al. Slow Release of Fullerene-Like WS2 Nanoparticles as a Superior Solid Lubrication Mechanism in Composite Matrices[J]. Advanced Engineering Materials,2001,3(1-2):71-75.
-
9大荫斋.润滑,1974,19(10):699-702.
-
10中国专利,CN1124718A
二级引证文献5
-
1刘涛,于景坤,袁宇皓.利用温度梯度法合成硫化物[J].东北大学学报(自然科学版),2005,26(3):260-262. 被引量:1
-
2程继贵,熊二涛,蒋阳,夏永红,吴玉程.WS_2超细粉体的固相法合成[J].应用化学,2006,23(7):786-789. 被引量:3
-
3何英.四氯化碳浸取-碘量法测定二硫化钨中游离硫[J].冶金分析,2010,31(2):70-73. 被引量:3
-
4刘雪云,孙虹,董宝,潘启玉,张燕燕.WS_2/TiO_2/绢云母复合物的制备及性能表征[J].安徽化工,2018,44(4):34-35.
-
5万林生,张耀静,肖学有,李广生.液相沉淀法制备WS_2超细粉体[J].中国钼业,2003,27(5):24-26. 被引量:1
-
1施凯烽,谢凤.纳米二硫化钨和二硫化钼薄膜制备方法概述[J].化工时刊,2017,31(1):32-35. 被引量:4
-
2王蓉颜,姚珍刚,黄坤林.细颗粒二硫化钨的制备[J].硬质合金,2000,17(4):204-207. 被引量:5
-
3林河成.浅谈二硫化钨的生产、应用及发展对策[J].湿法冶金,1998,17(1):20-21. 被引量:1
-
4林河成.二硫化钨的生产现状及发展对策[J].世界有色金属,1998(2):45-47.
-
5高纯超细二硫化钨粉末[J].技术与市场,2005(01A):10-10.
-
6林启权,毛波,董文正,阳菲.二硫化钼与二硫化钨填充改性聚四氟乙烯的摩擦学性能[J].高分子材料科学与工程,2016,32(11):51-57. 被引量:25
-
7林河成.二硫化钨的生产及发展对策浅析[J].稀有金属与硬质合金,1998,26(3):44-47. 被引量:2
-
8李家鸣.高纯超细二硫化钨粉末研制获重大突破[J].功能材料信息,2004,1(1):62-62.
-
9黄祥平,段金霞.纳米WS_2的制备及其应用探讨[J].三峡大学学报(自然科学版),2003,25(3):282-284. 被引量:2
-
10杜广煜,巴德纯,王晓光.硫化温度对硫化钨薄膜摩擦性能的影响[J].材料研究学报,2009,23(3):332-336.