期刊文献+

Flow Visualization around a Double Wedge Airfoil Model with Focusing Schlieren System

Flow Visualization around a Double Wedge Airfoil Model with Focusing Schlieren System
原文传递
导出
摘要 In the present study, aerodynamic characteristics of the double wedge airfoil model were investigated in a transonic flow by using the shock tube as an intermittent wind tunnel. The driver and driven gases of the shock tube are dry air. The airfoil model of double wedge has the span of 58 mm, chord length c = 75 mm and its maximum thickness is 7.5 mm. The apex of the double wedge airfoil model is located on the 35% chord length from the leading edge. The range of hot gas Mach numbers are from 0.80 to 0.88, and the Reynolds numbers based on chord length are 3.11× 10^5- 3.49× 10^5, respectively. The flow visualizations were performed by the sharp focusing schlieren method which can visualize the three dimensional flow fields. The results show that the present system can visualize the transonic flowfield clearer than the previous system, and the shock wave profiles of the center of span in the test section are visualized
出处 《Journal of Thermal Science》 SCIE EI CAS CSCD 2006年第1期31-36,共6页 热科学学报(英文版)
关键词 shock wave schlieren method transonic flow double wedge airfoil model 振动波 纹影法 跨音速流 双重楔 机翼模型
  • 相关文献

参考文献6

  • 1Weinstein,L M.An Improved Large-Field Focusing Schlieren System[]..1991
  • 2Kashitani,M,Yamaguchi,Y,Saito,T.Observation of Shock Tube Airfoil Row with a Sharp Focusing Schlieren Method[].Theoretical and Applied Genetics.2000
  • 3Cook,S P,Chokani,N.Quantitative Results from the Focusing Schlieren Technique[]..1993
  • 4Cook,W J,Presley,L L,Chapman,G T.Shock Tube as a Device for Testing Transonic Airfoils at High Reynolds Numbers[].AIAA Journal.1979
  • 5Puckett,A E,Stewart,H J.Aerodynamics Performance of Delta Wing at Supersonic Speeds[].J Aeronautical Sciences.1947
  • 6Shapiro,A H.The Dynamics and Thermodynamics of Compressible Fluid Flow[]..1980

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部