期刊文献+

铸钢件熔模精密铸造凝固过程数值模拟 被引量:13

Numerical Simulation of Solidification Process of Cast Steel Investment Castings
下载PDF
导出
摘要 熔模精密铸造在现代铸造行业所占比重越来越大,采用计算机数值模拟的方法模拟熔模精密铸造凝固过程,预测铸造过程可能产生的缺陷,有助于改进以“试错法”为主的传统的工艺设计方式,能够有效的缩短生产周期,节约成本,对于铸造企业来说具有重要的意义。建立了熔模精密铸造凝固过程数值模拟的物理数学模型,采用自行开发的软件模拟了熔模铸钢件的凝固过程,对缩孔缺陷进行了预测,并且将该软件的模拟结果与实际结果进行了对比。 The proportion of investment casting products in modern casting industry increased very fast these years. Predicting the possible defects of investment casting by the computer simulation of solidification process is helpful for casting industry to optimize the techniques of investment casting, which will reduce the production cycle and save the cost compared with the traditional trial and error method. In this paper, the physical and mathematical model was presented and the numerical simulation of investment castings of steel casting based on this model was carried out to predict the shrinkage defects. The simulation results were compared with experimental results.
出处 《铸造》 EI CAS CSCD 北大核心 2006年第5期473-476,共4页 Foundry
基金 国家重点基础研究项目(2005CB724105) 国家自然科学基金(10477010)
关键词 熔模铸造 数值模拟 缩孔 铸钢 investment casting numerical simulation shrinkage cast steel
  • 相关文献

参考文献7

  • 1LIU B C.Progress in solidification modeling of cast iron in china[J].INT.J.CAST.METALRES.,1999 (5):259-266.
  • 2SCHEPPE F,SAHM P R.Comparison of the numerical simulation and the cast process of nickel aluminides[J].Modeling of Casting,Welding and Advanced Solidification Process Ⅸ,Edited by Peter R.Sahm,2000,207-214.
  • 3WU M,WAGNER I,SAHM P R.Integration of numerical simulated and rapid prototyping for investment castings[J].Modeling of Casting,Welding and Advanced Solidification Process Ⅸ,Edited by Peter R.Sahm,2000:278-283.
  • 4STEMMLER M,LASCHET G,HAAS L.Simulation of investment casting:coupling of contact and heat transfer calculation between tasting and mold during solidification[J].Modeling of Casting,Welding and Advanced Solidification Process Ⅸ,Edited by PeterR.Sahm,2000:222-229.
  • 5王贵,杨莉,周铁涛.熔模精铸件凝固过程温度场的数值模拟[J].北京航空航天大学学报,2000,26(3):249-251. 被引量:13
  • 6梁作俭,许庆彦,李俊涛,李世琼,张继,柳百成,仲增墉.γ-TiAl增压涡轮熔模铸造过程数值模拟研究[J].稀有金属材料与工程,2003,32(3):164-169. 被引量:30
  • 7Li, JR,Liu, BC.Study of Solidification Shrinkage of Ductile Iron in Dry Sand Molds[J].Journal of Materials Science & Technology,1999,15(3):245-250. 被引量:1

二级参考文献3

  • 1王贵.精密铸造过程温度场数值模拟技术的研究[M].北京:北京航空航天大学材料科学与工程系,1996..
  • 2陈海清,铸件凝固过程数值模拟,1991年
  • 3李锡年.立式离心铸造技术及其应用[J].铸造技术,1999(1):10-13. 被引量:15

共引文献38

同被引文献119

引证文献13

二级引证文献57

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部