期刊文献+

少自由度并联机器人的研究现状 被引量:53

The State of Research on Limited-DOF Parallel Robot
下载PDF
导出
摘要 并联机器人是20世纪80年代新兴起的先进技术,它从一出现就受到国内外众多学者的关注。并联机器人技术已经从理论研究走向实际应用,而少自由度并联机器人是近年来并联机器人研究中的一个热点问题。本文综述了少自由度并联机器人国内外研究现状以及关键技术的研究进展,指出少自由度并联机器人理论及应用领域有待深入开展的研究方向。 As a completely new - type of robot, the parallel robot is a new arisen advanced technology. It drew the scholars' attention when parallel robot appeared, The limited - DOF parallel robot is a hotspot of research. Research state and development on key technology of limited - DOF parallel robot were summarized. Study aspect of limited - DOF parallel robot in application field was pointed out.
出处 《机床与液压》 北大核心 2006年第5期202-205,共4页 Machine Tool & Hydraulics
基金 国家"863"高技术计划资助项目(863-9803-05) 国家自然科学基金资助项目(59875012)
关键词 少自由度 并联机器人 研究现状 Limited degree - of - freedom (DOF) Parallel robot Research state
  • 相关文献

参考文献6

二级参考文献40

  • 1Besnard S, Khalil W. Calibration of parallel robots using two inclinometers. In: Proc. of ICRA, Detroit, MI, USA,1999: 1758-1763.
  • 2Maurine P, Dombre E. A calibration procedure for the parallel robot Delta 4. In: Proc. of ICRA, Minneapolis,MN, 1996: 975-980.
  • 3Ota H, Shibukawa T. Forward kinematic calibration method for parallel mechanism using pose data measured by a double ball bar system. CIRP Workshop, Paris, 2001.
  • 4Rauf A, Ryu J. Fully autonomous calibration of parallel manipulators by imposing position constraint. In:Proc. of ICRA, Como, Italy, 2001:389--394.
  • 5Sartori S. Geometric error measurement and compensation of machines. Annals of CIRP, 1995, 44(2): 599-609.
  • 6Soons J A. On the geometric and thermal error of a hexapod machine tool. In: Proc. of USA-Europe Forum on Parallel Kinematic Machines, Milano, Italy, 1999:151-169.
  • 7Huang T. A simple yet effective approach for error compensation of a tripod-based parallel kinematic machine.Annals of CIRP, 2000, 49(1): 285-288.
  • 8Zhuang H, Yah J, Masory O. Calibration of Stewart platform and other parallel manipulators by minimizing inverse kinematic residual. J. of Robotic System, 1998, 15(7):395--405.
  • 9傅金元,机械工程学报,1991年,27卷,2期,31页
  • 10唐鸿,硕士学位论文,1991年

共引文献66

同被引文献457

引证文献53

二级引证文献345

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部