期刊文献+

PVC DISULFIDE AS CATHODE MATERIALS FOR SECONDARY LITHIUM BATTERIES

PVC DISULFIDE AS CATHODE MATERIALS FOR SECONDARY LITHIUM BATTERIES
下载PDF
导出
摘要 PVC disulfide (2SPVC) was synthesized by solution crosslink and its molecular structure was confirmed by infrared spectrum. 2SPVC's specific area is 36.1 m^2·g^-1 tested by stand BET method, and granularity experiment gives out the particle size of d0.5 = 11.3 μm. With SEM (Scanning Electron Microscope) experiment the surface morphology and particle shape of 2SPVC were observed. Cyclic voltammetry (scan rate: 0.5 mV · s^-1) shows that 2SPVC experience an obvious S-S redox reaction in charge-discharge process. When 2SPVC was used as cathode material for secondary lithium battery in a 1 mol·L^-1 solution of lithium bis(trifluoromethylsulfonyl) imide (Li(CF3SO2)2N) in a 5:45:50 volume ratio mixture of o-xylene (oxy), diglyme (DG) and dimethoxymethane (DME) at 30℃, the first discharge capacity of 2SPVC is about 400.3 mAh·g^-1 which is very close to its theoretical value (410.5 mAh ·g^-1) at a constant discharge current of 15 mA·g^-1. It can retain at about 346.1 mAh ·g^-1 of discharge capacity after 30 charge-discharge cycles. So 2SPVC is a very promising cathode candidate for rechargeable lithium batteries. PVC disulfide (2SPVC) was synthesized by solution crosslink and its molecular structure was confirmed by infrared spectrum. 2SPVC's specific area is 36.1 m^2·g^-1 tested by stand BET method, and granularity experiment gives out the particle size of d0.5 = 11.3 μm. With SEM (Scanning Electron Microscope) experiment the surface morphology and particle shape of 2SPVC were observed. Cyclic voltammetry (scan rate: 0.5 mV · s^-1) shows that 2SPVC experience an obvious S-S redox reaction in charge-discharge process. When 2SPVC was used as cathode material for secondary lithium battery in a 1 mol·L^-1 solution of lithium bis(trifluoromethylsulfonyl) imide (Li(CF3SO2)2N) in a 5:45:50 volume ratio mixture of o-xylene (oxy), diglyme (DG) and dimethoxymethane (DME) at 30℃, the first discharge capacity of 2SPVC is about 400.3 mAh·g^-1 which is very close to its theoretical value (410.5 mAh ·g^-1) at a constant discharge current of 15 mA·g^-1. It can retain at about 346.1 mAh ·g^-1 of discharge capacity after 30 charge-discharge cycles. So 2SPVC is a very promising cathode candidate for rechargeable lithium batteries.
出处 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2006年第3期307-313,共7页 高分子科学(英文版)
关键词 PVC disulfide (2SPVC) CATHODE Lithium battery Capacity Cycle. PVC disulfide (2SPVC) Cathode Lithium battery Capacity Cycle.
  • 相关文献

参考文献2

二级参考文献10

  • 1[1]R.S.Polvani,W.S.Tzeng and P.R.Strutt,Metall.Trans.7A (1976) 33.
  • 2[2]R.D.Field,R.Darolia and D.F.Lahrman,Scr.Metall.23 (1989) 1467.
  • 3[3]W.J.Boettinger,L.A.Bendersky,F.S.Biancaniello and J.W.Cahn,Mater.Sci.Eng.98 (1988) 273.
  • 4[4]W.H.Tian,S.L.Hu and M.Nemoto,Acta Metall.Sin.(English Lett.) 12 (1999) 173.
  • 5[5]W.H.Tian,A.L.Fan and M.Nemoto,Acta Metall.Sin.(English Lett.) 13 (2000) 1023.
  • 6[6]P.Nash and W.W.Liang,Metall.Trans.16A (1985) 319.
  • 7[7]M.Yamaguchi,Y.Umakoshi and T.Yamane,Phil.Mag.bf 50A (1984) 205.
  • 8[8]M.Yamaguchi and T.Umakoshi,Prog.Mater.Sci.34 (1990) 1.
  • 9[9]W.H.Tian,T.Sano and M.Nemoto,J.Jpn.Inst.Met.53 (1989) 1013,1022,1029.
  • 10[10].E.Arzt,J.Rosler and J.H.Schroder,Proc.3rd Int.Conf.Creep and Fracture of Engineering Materials and Structures,eds.B.Wilshire and R.W.Evans (Institute of Metals,London,1987) p.463.

共引文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部