摘要
为保证高强度预应力钢绞线用SWRH82B盘条的组织性能,采用了3种不同冷却速度的控冷工艺进行试验。结果得出,部分风机开口度为100%,部分风机开口度为50%时,可获得最佳效果。
To assure the microstructure and performance of SWRH82B wire for steel strand, different controlled cooling technologies were tested. The results show that the best controlled cooling technology was obtained which the opened angle of .some blowers were 100% and the others were 50%.
出处
《轧钢》
2006年第2期56-58,共3页
Steel Rolling
关键词
SWRH82B盘条
控冷工艺
组织性能
钢绞线
SWRH82B wire
controlled cooling
microstructure and performance
steel strand
