摘要
基于小信号模型理论,建立了Buck变换器并联电路的小信号模型,然后根据自主均流技术原理,分析了均流控制系统的设计过程,包括电压环、均流环的设计,从而形成了完整的自主均流技术设计步骤.根据所建立的模型,制作了一台由两个Buck变换器并联组成的样机,通过比较未采用均流控制和采用自主均流控制的两组实验结果,验证了文中所提控制系统设计方法的正确性.
A small-signal model of the paralleled Buck converter is established based on the theory of small-signal modeling. Then, the design process of an automatic current sharing control system, including the designs of the voltage loop and the current sharing loop, are analyzed and proposed. The established model is finally adopted to set up a prototype with two paralleled Buck moduli. By comparing the experimental results with or without the automatic current sharing control, the correctness of the proposed design method is finally verified.
出处
《华南理工大学学报（自然科学版）》
EI
CAS
CSCD
北大核心
2006年第4期56-60,69,共6页
Journal of South China University of Technology(Natural Science Edition)
基金
广东省自然科学基金资助项目(04020012)
关键词
自主均流控制
小信号模型
BUCK变换器
建模
设计
automatic current sharing control
small-signal model
Buck converter
modeling
design
