期刊文献+

TiO_2对镁锰牺牲阳极材料显微组织和电化学性能的影响 被引量:6

Effect of TiO_2 on Microstructure and Electrochemical Properties of Magnesium Sacrificial Anode Materials
下载PDF
导出
摘要 研究了含TiO2的熔剂对镁锰牺牲阳极材料显微组织和电化学性能的影响。结果表明,用含TiO2的熔剂对Si和Fe含量较高的纯镁处理后,镁熔体的Si和Fe的含量分别降到了0.004 5%和0.005%。金相观察表明,TiO2的加入细化了晶粒。根据镁钛二元合金相图和X衍射图谱,有微量的钛固溶于镁基体中,并且没有发现第二相。当采用含20%TiO2的熔剂处理镁熔体时,镁阳极的电化学性能已经达到了行业标准。 Effects of flux containing TiO2 on the electro-chemical properties and microstructure were studied. Results showed that with addition of TiO2, the Fe and Si content of the magnesium ingot with high Si and high Fe are decreased to 0. 004 5% and 0. 005%. Metallographic analysis showed that the grain size has been refined. According to the Mg-Ti binary phase diagram and the x-ray spectrum analysis, trace amount of Ti is dissolved in the magnesium matrix, and no second phase precipitates in the matrix. Electrochemical test showed that the electrochemical properties of the material treated by the fluxes containing 20 % TiO2 meet the requirement of the industrial specification.
出处 《铸造技术》 EI CAS 北大核心 2006年第5期514-516,520,共4页 Foundry Technology
基金 河南省高校创新人才工程资助项目(豫2001-6) 河南省科技攻关资助项目(0224360015)
关键词 镁锰牺牲阳极材料 电化学性能 TIO2 Mg-Mn sacrificial anode materials Electrochemistry property TiO2
  • 相关文献

参考文献7

  • 1马丽杰,宋曰海,郭忠诚,樊爱民.Al-Zn-In-Cd牺牲阳极材料的电化学性能研究[J].材料开发与应用,2004,19(1):32-34. 被引量:12
  • 2Kim J G,Joo J H,koo S J.Development of high-driving potential and high-efficiency Mg-based sacrificial anodes for cathodic protection[J].J Mater Sci Letters,2000,19:477.
  • 3ASTM G97,1995 Annual Book of ASTM Standards,Vol.02.02[M].Philadelphia,PA:ASTM1995.
  • 4Deboer F R,Boom R,et al.Cohesion in metals[M].North-Holland physics publishing(a division of Elsevier Service publishers),1988.
  • 5李华伦,胡锐,曲卫涛,于家康.镁及镁合金的高纯净化[J].特种铸造及有色合金,2001,21(S1):87-89. 被引量:11
  • 6陈虎魁 刘建 沈淑娟.镁合金中的铁及其去除[J].中国镁业,2003,(6):33-37.
  • 7吴国华,邹宏辉,翟春泉,曾克,丁文江.TiO2对镁合金废旧料组织性能的影响[J].铸造,2003,52(3):167-170. 被引量:17

二级参考文献9

共引文献36

同被引文献83

引证文献6

二级引证文献35

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部