摘要
基于nRF401微控制器M16C/62的无线控制,电路设计选用433MHz通道,从nRF401芯片引出DIN、DOUT、TXEN、RF_PWR、VCC、GND六根线,做成插槽。DIN、DOUT与M16C/62的串口线P62、P63连接,并用M16C/62的P23连接TXEN,以便控制数据的接收或是发送。其软件设计则包括通信协议、M16C微控制器端及PC机端控制界面等部分的设计。
The wireless control is based on nRF401 microcontroller M16C/62, The 433MHz channel was adopted by circuit design. The DIN, DOUT, TXEN, RF_PWR, VCC, and GND in nRF401 chip were used as slots. The DIN and DOUT were combined with serial port line P62 and P63 in M16C/62; and the P23 in M16C/62 was used to link with TXEN to control the data receiving and sending, its software design includes communication protocol design, M16C microcontroller end design and PC end control interface design.
出处
《兵工自动化》
2006年第5期57-59,共3页
Ordnance Industry Automation
