期刊文献+

湘钢高Al_2O_3高炉渣排碱能力的探讨 被引量:4

Discussion on alkali discharge of high Al_2O_3 BF slag in Xiangtan Iron & Steel Corp.
下载PDF
导出
摘要 根据湘钢冶炼条件,以湘钢现场渣为基料,添加化学试剂,配制成高Al2O3渣系,研究高Al2O3炉渣条件下,炉渣碱度、主要成分等对炉渣排碱性能的影响。研究表明,在高Al2O3炉渣条件下,适当提高湘钢高炉渣中自由SiO2的质量分数,w(MgO)为12%,二元碱度为1.05,最有利于排碱。 This paper studies the effect of basicity and compositions of slag on the capacity of alkali discharge under the condition of high Al2O3 slag. The research was carried out based on operating condition in Xiangtan Steel using synthetic slag which was made by adding chemical agents into blast furnace slag. The results showed that under high Al2O3 slag condition in Xiangtan Steel, appropriately increasing free SiO2 mass ratio in slag to get slag with the composition of MgO 12 % and m(CaO)/m(SiO2) 1.05 resulted in the enhance of alkali discharge capacity of slag.
出处 《钢铁研究》 CAS 2006年第3期10-14,共5页 Research on Iron and Steel
关键词 高Al2O3 高炉渣 排碱 high Al2O3 BF slag alkali discharge
  • 相关文献

参考文献4

共引文献26

同被引文献31

引证文献4

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部