门式启闭机的参数化有限元分析系统

The Parameterized Finite Element Analysis System of Hydraulic Gate Hoist Structure

将ANSYS的二次开发语言APDL与VC相结合,开发门式启闭机门架结构的参数化有限元分析系统.利用VC编制对话框界面,对ANSYS有限元分析过程进行封装,系统运行时只需输入分析所需的参数,就可以在后台运行ANSYS,实现门式启闭机门架结构的有限元分析.某工程双向门式启闭机的算例表明了系统实现的可行性.

Combining APDL in ANSYS with VC, the parameterized finite element analysis system of the hydraulic gate hoist structure is developed. By using VC to make dialog interfaces to cover the ANSYS finite element analysis process, inputting the needed parameters, the system itself will produce the APDL program and run ANSYS automatically, which realizes the parameterized finite element analysis of the gate hoist structure. A case study is used to prove the feasibility of the analysis system.