期刊文献+

克拉玛依油田J_1b^5油层有效厚度研究 被引量:5

Study on net pay in J_1b^5 reservoir of Karamay Oilfield
下载PDF
导出
摘要 针对克拉玛依油田五区八道湾组(J1b5)油藏有效厚度划分中存在的问题,提出了油层有效厚度划分的图版参数。首先利用目的层段电阻率与声波时差关系确定有效厚度的岩性标准,再根据油藏地层水电阻率和a、b、m、n参数值,采用含油饱和度图版法确定油层有效厚度的电阻率、孔隙度和含油饱和度的下限标准。从而,在油层有效厚度评价中精细地识别储层的岩性、物性和含油性,有效地剔除储层中的砾石层、泥质层、致密层、干砂层和差油层,确定各井的有效厚度,提高了测井解释和储量计算的精度,为该区油藏增储上产和预测剩余油分布提供了可靠依据。 Chart parameters are proposed for net pay thickness division in accordance with the problems in net pay thickness division in J_1b^5 reservoir,Badaowan formation,Block 5,Karamay Oilfield.The lithology standard of net pay thickness is determined by using the R_t and Δt relation in target zone,and the cut-off value of resistivity,porosity and oil saturation in net pay are determined by using oil saturation chart board in accordance with formation water resistivity and a,b,m,n value.Therefore,the lithology,petrophysical property and oilbearing property of reservoirs can be identified to recognize gravel bed,shale, tight zone,dry sand and poor oil reservoir,to determine the net pay in each well,to improve the accuracy of log interpretation and reserve estimation,and to provide reliable basis for finding more reserves and residual oil distribution in this region.
出处 《特种油气藏》 CAS CSCD 2006年第3期45-48,共4页 Special Oil & Gas Reservoirs
关键词 有效厚度 下限标准 岩电参数 岩性 物性 含油性标准 克拉玛依油田 net pay cut-off litho-electric parameter standard of lithology,petrophysical property and oil-bearing property Karamay Oilfield
  • 相关文献

参考文献5

二级参考文献17

  • 1傅广,陈章明,姜振学.盖层封堵能力评价方法及其应用[J].石油勘探与开发,1995,22(3):46-50. 被引量:53
  • 2宋子齐,谭成仟,曲政.利用灰色理论精细评价油气储层的方法[J].石油学报,1996,17(1):25-31. 被引量:31
  • 3罗蛰潭.油层物理[M].北京:地质出版社,1985..
  • 4宋子齐,沈84块水淹层精细评价解释及剩余油分布研究(科研报告),1998年
  • 5宋子齐,灰色理论油气储层评价,1995年
  • 6杨通佑,石油及天然气储量计算方法,1990年
  • 7宋子齐,测井技术,1998年,22卷,6期
  • 8胡复唐,砂砾岩油藏开发模式,1997年
  • 9宋子齐,灰色理论油气储层评价,1995年
  • 10Journel A G.Stochastic modelling of a fluvial reservoir: a comparative review of algorithms[J]. JPSE, 1998:95 ~ 121.

共引文献114

同被引文献60

引证文献5

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部