期刊文献+

全啮合同向旋转双螺杆挤出机螺槽中压力分布的研究

A Research on Pressure Distribution in the Channel of Co-rotating Intermeshing Twin Screw Extruder
下载PDF
导出
摘要 应用Navier-Stokes方程建立了高分子聚合物在双螺杆挤出机螺槽中压力分布的计算模型.分析了喂料量、螺杆冷却方式、螺杆转速等操作工艺参数与螺槽中压力分布的关系,以及压力分布对挤出物质量(即挤出物的物理性质和力学性能)的影响.通过改善螺槽中的压力分布,寻找最佳操作工艺参数,并在此操作条件下进行了实验论证. A dew computing model of pressure distribution of ploymer in the channel of twin screw extruder is established. It is used to analyse the relation of operating parameters, such as rotation rate of screw, cold screw process , feed quantity and pressure distribution; and the effects of pressure distribution on the quality of extrusion material. By modifying the pressure distribution, the optimum operating parameters were determined. The computing results are compared with the experimental ones.
作者 李品华
出处 《上海交通大学学报》 EI CAS CSCD 北大核心 1996年第5期115-120,共6页 Journal of Shanghai Jiaotong University
关键词 双螺杆挤出机 压力分布 挤出物质量 s: twin screw extruder pressure distribution extrusion material quality
  • 引文网络
  • 相关文献

参考文献5

  • 1李品华,机械设计与研究,1991年,33卷,1期,29页
  • 2柳和生,博士学位论文,1990年
  • 3李品华,硕士学位论文,1988年
  • 4耿孝正,塑化挤出工程原理,1984年
  • 5朱复华,1982年
;
使用帮助 返回顶部