期刊文献+

液下辉光放电等离子体重整低碳醇水溶液制氢 被引量:6

Hydrogen generation from reforming of lower alcohols aqueous solution by glow discharge plasma under liquid
下载PDF
导出
摘要 探讨了阴极液下辉光放电等离子体重整低碳醇水溶液制氢反应过程.比较了水溶液和低碳醇水混合溶液中阴极等离子体重整制氢实验,发现以低碳醇水溶液为等离子体重整介质时,低碳醇分子在阴极等离子体层中表现出明显高于水分子的反应活性,阴极气体单位体积能耗可以降至2·690×103kJ·m-3,生成气体中氢气含量达95%,并有一氧化碳和二氧化碳.分析了电压对阴极生成气单位体积能耗和气体组成的影响,发现电压越高等离子体密度越大,阴极生成气单位体积能耗降低,被等离子体分解的溶剂溶质分子也越多.比较了不同浓度低碳醇溶液的产气情况,低碳醇浓度对生成气组成和单位体积能耗有重要影响. The reforming process of lower alcohols aqueous solution by cathodic glow discharge plasma, in which hydrogen was produced across a gaseous envelope over the cathode, was studied. The experiments using water and lower alcohols water mixture as reforming raw materials to generate hydrogen-rich gas were conducted. The experimental results showed that lower alcohols molecules were more active than water molecules. The cathodic liberated gases were mixtures of hydrogen, carbon dioxide and carbon monoxide and the concentration of hydrogen was about 95 %. The energy consumption per cubic meter gas was 2. 690× 10^3 kJ · m ^-3. The influence of voltage across the circuit on the composition of cathodic gas and power consumption per cubic meter gas was analyzed. It was found that plasma density increased with the increase of voltage, and the quantity of decomposed solvent molecule and solute molecule increased in the course of voltage increasing. The influence of lower alcohols concentration in solution on the composition of cathodic liberated gas and power consumption per cubic meter gas was investigated.
出处 《化工学报》 EI CAS CSCD 北大核心 2006年第6期1432-1437,共6页 CIESC Journal
关键词 辉光放电 低碳醇 制氢 重整 液下放电等离子体 glow discharge lower alcohols hydrogen generation reforming discharge plasma under-liquid
  • 相关文献

参考文献5

二级参考文献78

  • 1[1]Yuan-sheng Tyan,Webster N Y. Polycrystalline thin film CdS/CdTe photovoltaic cell [P]. US Patent: 4207119, 1980.
  • 2[2]Britt J,Ferekides C. Thin-film CdS/CdTe solar cell with15.8 % efficiency [ J ]. Appl Phys Lett, 1993,62 ( 22 ): 2851.
  • 3[3]AramotoT,KumazawaS,HiguchiH, etal. 16.0% effi cient thin film CdS/CdTe solar cells [ J ]. Jpn J ApplPhys, 1997,36(10): 6304-6305.
  • 4[4]Wu X, Dhere R G, Albin D S, et al. High-efficiency CTO/ZTO/CdS/CdTe polycrystalline thin-film solar cells[A]. NREL, Proceedings of NCPV Program Review Meeting [C], New York: AIP, 2001. 47-48.
  • 5[5]Moutinho H R, Hasoon F S, Abulfotuh F, et al. Investi gation of polycrystalline CdTe thin films deposited by physical vapor deposition, Close-Spaced Sublimation, and Sputtering [ J ]. J Vac Sci & Technl, 1995, 13 ( 6 ): 2877-0734.
  • 6[6]Chakrabarti R, Ghosh S, Chaudhuri S, et al. Rapid ther mal processing for the preparation of CdTe film [J ]. J Phys, D: Appl Phys, 1999,32( 11 ): 1258-1262.
  • 7[8]Ahmad-Bitar R, Arafah D E, Processing effects on the structure of CdTe, CdS and SnO2 thin films [ J ]. Solar energy materials and solar cells. 1998, 51(1) :83-93.
  • 8[9]Sirohi S, Sharma T P. Bandgaps of cadmium telluride sintered film [J ]. Optical materials, 1999, 13 (2):267- 269.
  • 9.[EB/OL].http:∥www. nrel. gov/docs/fy02osti/30886. pdf.,.
  • 10楚丽明 汤传毅.[A]..第二届国际氢能论坛2003青年氢能论坛论文集[C].北京,.52-56.

共引文献58

同被引文献87

引证文献6

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部