期刊文献+

会聚束电子衍射研究蠕变镍基高温合金中γ和γ’相的局域应变分布 被引量:1

CBED STUDY OF LOCAL STRAIN DISTRIBUTION IN γ and γ' PHASES OF A CREPT Ni BASE SUPERALLOY
下载PDF
导出
摘要 用高分辨率会聚束电子衍射方法(CBED)测量了单晶镍基高温合金CMSX-6在980℃蠕变后γ和γ’两相中的弹性应变分布.测量表明在水平和垂直的γ通道中存在着弹性应变的差别,这种差别被认为是筏化的驱动力.在γ’相中还观察到弹性应变的不均匀分布. The high lateral resolution covergent beam electron diffraction (CBED) method was applied to measure the local elastic strain distributions in the two phases γ, and γ^1 of the monocrystalline nickel base superalloy CMSX-6 crept at 980 ℃. CBED measurements show that there is a difference of elastic strain in the vertical and horizontal γ, channels, which is thought to be the driving force for rafting. An inhomogeneous distribution of elastic strain is also observed in the γ^1 phase.
出处 《金属学报》 SCIE EI CAS CSCD 北大核心 2006年第7期694-698,共5页 Acta Metallurgica Sinica
关键词 会聚束电子衍射 镍基高温合金 应变 covergent beam electron diffraction (CBED), Ni base superalloy, strain
  • 相关文献

参考文献19

  • 1Kuhn H A,Biermann H,UngárT,Mughrabi H.Acta Metall Mater,1991; 39:2783
  • 2Biermann H,yon Grossmann B,Ungar T,Mechsner S,Souvorov A,Drakopoulos M,SnigirevA,Mughrabi H.Acta Mater,2000; 48:2221
  • 3Glatz el U,Müller A.Scr Metall Mater,1994; 31:285
  • 4V(o)lkl R,Glatzel U,Feller-Kniepmeier M.Acta Mater,1998; 46:4395
  • 5Keller R R,Maier H J,Renner H,Mughrabi H.Scr Metall Mater,1992; 27:1176
  • 6yon Grossmann B,Biermann H,Mughrabi H.Philos Mag,2000; 80A:1743
  • 7Von Grossmann B,Biermann H,Tetzlaff U,Pyczak F,Mughrabi H.Scr Mater,2000; 43:859
  • 8Keller R R,Maier H J,Renner H,Mughrabi H.Scr Metall Mater,1993; 28:661
  • 9Miüller L,Link T,Feller-Kniepmeier M.Scr Metall Mater,1992; 26:1297
  • 10Zuo J M.Ultramicroscopy,1992; 41:211

同被引文献12

  • 1YANG Jin-xia(杨金侠), ZHENG Qi(郑启), SUN Xiao- feng(孙晓峰) ,et al. Morphological evolution of γ phase in K465 superalloy during thermal fatigue[J]. Transac- tions of Nonferrous Metals Society of China, 2006, 16 (S3) : 1986-1989.
  • 2Jackson M P, Reed R C. Heat treatment of UDIMET 720Li: the effect of microstructure on properties [J]. Materials Science and Engineering, 1999, A259 ( 1 ) : 85-97.
  • 3Monajati H, Jahazi M, Bahrami R, et al. The influence of heat treatment conditions on γ characteristics in Udi- met[J]. Materials Science and Engineering,2004, A373 (1/2) :286-293.
  • 4Ges A, Fornaro O, Palacio H. Coarsening behavior of a Ni-base superalloy under different heat treatment condi- tions[J]. Materials Science and Engineering,2007,A458 (1/2) :96-100.
  • 5Gunduz M, Cadirli E. Directional solidification of alu- minium-copper alloys[J]. Materials Science and Engi- neering, 2002, A327 (2) : 167-185.
  • 6Kurz W, Fisher D J. Fundamentals of solidification[M].4版,李建国,胡侨丹,译.北京:高等教育出版社,2010:247-260.
  • 7Ma D X, Sham P R. Primary spacing in directional so- lidification[J]. Metallurgical and Materials Transac- tions A,1998,29(3) :1113-1119.
  • 8杨金侠,李金国,王猛,王延辉,金涛,孙晓峰.热处理工艺对一种新型铸造镍基高温合金的组织和性能影响[J].金属学报,2012,48(6):654-660. 被引量:11
  • 9陈昊,董建新,张麦仓.热处理工艺对铸造高温合金K480组织的影响[J].材料热处理学报,2012,33(7):37-44. 被引量:12
  • 10张姝.镍基单晶合金热处理的组织演化与有限元分析[J].特种铸造及有色合金,2012,32(8):720-724. 被引量:4

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部