期刊文献+

CDQ焦炭运动粘性流模型壁面摩擦的研究 被引量:1

Study on Wall Friction of Coke Behavior in CDQ by Kinetic Viscous Flow Model
下载PDF
导出
摘要 采用滑移边界条件,分析了颗粒群与壁面摩擦力的2个决定因素:摩擦系数和法向压力,提出了摩擦力计算表达式,并应用于模拟干熄炉内焦炭运动的粘性流模型。计算结果表明,滑移边界条件的处理能显著改善干熄炉渐扩段的模拟;干熄炉中下部,壁面摩擦力对近壁处焦炭下降影响显著;文中提出的摩擦力计算方法适用于模拟干熄炉内焦炭下降的粘性流模型。 By means of slip movement boundary condition, two decisive factors of particle group and wall friction are analyzed: friction factor and normal pressure, the expression for calculating friction is given and is used for simulating viscous flow model for descending of coke in CDQ chamber. The calculated results show that the disposal of slip boundary condition can substantially improve the simulation in expanding section of CDQ chamber; At the lower part Of CDQ chamber, the wall friction has obvious influence on coke descending near the wall; the friction calculating method given in the paper is applicable to simulating viscous flow model of coke descending in CDQ chamber.
出处 《燃料与化工》 2006年第4期8-12,共5页 Fuel & Chemical Processes
关键词 干熄炉 焦炭下降 粘性流模型 摩擦 滑移边界条件 CDQ chamber Coke descending Viscous flow model Friction Slip boundary condition
  • 相关文献

参考文献8

  • 1于泉,张欣欣,冯妍卉,姜泽毅,徐列,郑文华,董兴宏.干熄炉内焦炭下降的粘性流模型及其比较研究[J].工业加热,2005,34(1):11-13. 被引量:8
  • 2Peter D. Burke, John M. Burgess. A Coupled gas and solid flow heat transfer and chemical reaction rate model for the ironmaking blast furnace. IRONMAKING CONFERENCE PROCEEDINGS,1989, Vol. 49:773
  • 3U, Tuzun, G.T. Houlsby, R. M. Nedderman etc. Velocity distributions in slow flow. Chemical Engineering Scienee, 1982 ,Vol. 37,No. 12: 1691
  • 4Jizhong CHEN, Tomohiro AKIYAMA. Modeling of solid flow in moving beds, ISIJ International, 1993, Vol. 33, No. 6:664
  • 5S.J. Zhang, A.B. Yu etc. Modelling of the solids flow in a blast furnace. ISIJ international, 1998, Vo1.38, No. 12:1311
  • 6H. Abou - Chakm, U. TuZun, Coefficient of friction of binary granular mixtures in contact with a smooth wall. ART B. Microstructural model describing the effects of packing fraction and load distribution on the wall friction of smooth, elastic spheres [J].Chemical Engineering Science 54 (1999) 5913
  • 7H. Abou - Chakra, U. TuZun, Coefficient of friction of binary granular mixtures in contact with a smooth wall PARTI:Directshear box measurements of the effects of particle size ratio and particle surface roughness [J] Chemical Engineering Science 54 (1999) 5901
  • 8Nedderman, R. M.. The theoretical prediction of stress distributions in hoppers. Transaction of the Institution of Chemical Engineers, (1982) 60, 259

二级参考文献10

  • 1高建业,高熙熙.全球干熄焦技术发展的回眸与展望[J].冶金信息导刊,2004,41(3):5-7. 被引量:7
  • 2ISHII M. Thermo-Fluid Dynamic Theory of Two-phase Flow[M]. Paris: Eyrolles, 1975.
  • 3DURST F, Eulerian and Lagrangian Predictions of Particulate Two-phase Flows: a Numerical Study [J]. Appl. Math. Modelling,1984, (8): 101-115.
  • 4LANGSTON P A, TUZUN U, HEYES D. M. Discrete Element Simulation of Granular Flow in 2D and 3D Hoppers: Depence of Discharge Rate and wall Scress on Particle Interations [J].Chem. Eng. Sci. 1995, (50): 967.
  • 5JIZHONG CHEN, TOMOHIRO AKIYAMA, Modeling of Solid Flow in Moving Beds [J]. ISIJ International, 1993, 33 (6):664-671.
  • 6PETER D. BURKE, JOHN M, etal. A CoupledGas and Solid Flow Heat Transfer and Chemical Reaction Rate Model For The Ironmaking Blast Furnace [J]. Ironmaking Conferenfe Proceedings, 1989, (49): 773-781.
  • 7NEDDERMAN R. M. AND TUZUN. U. A Kinematic Model for the Flow of Granular Materials [J]. Powder Technology,1978, 20 (24): 243-253.
  • 8MGTEPLITSKIL IZGORDON NAKUDRYAVAYA etal 李哲浩译.干法熄焦[M].北京:冶金工业出版社,1981..
  • 9吴清松,胡茂彬.颗粒流的动力学模型和实验研究进展[J].力学进展,2002,32(2):250-258. 被引量:28
  • 10席宝山,郭丰才.大力推广干熄焦(CDQ)技术是炼焦业节能治污的新路[J].科技情报开发与经济,2003,13(8):66-67. 被引量:2

共引文献7

同被引文献9

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部