期刊文献+

ICP-AES法测定Pb基新合金中镧、钙、锡、钐量 被引量:5

Determination of La、Ca、Sn、Sm in Pb-new Alloy by ICP-AES
下载PDF
导出
摘要 文章讨论了利用美国热电公司生产的全谱直读ICP光谱议,同时测定Pb基新合金中的La、Ca、Sn、Sm等元素含量的分析方法。对影响ICP分析可靠性的各种因素进行了考察,确定了合适的分析谱线和最佳工作条件。在此条件下测定,获得了满意结果。方法的检出限为0.013~0.084μg/mL,回收率为90.0%~100.8%,KSDi小于4.53%。 The paper describes the ICP-AKS method for the determination of La,Ca,Sn,Sm in Pb-new alloys.The optimal conditions of the determination are established. Under the conditions, satisfactory results can be achieved. The detection limits for 4 elements is in the range of 0. 013 - 0. 084 μg/mL.Recoveries of the elements are in the range of 90.0% - 100.8%.The elements have been determined with RSD〈 4.53%.
作者 雷素函
出处 《湖南有色金属》 CAS 2006年第4期58-59,72,共3页 Hunan Nonferrous Metals
关键词 Pb基新合金 ICP-AES法 Pb-new alloys the ICP-AKS method La, Ca, Sn, Sm
  • 相关文献

参考文献2

  • 1GB10725—89,电感耦合高频等离子体原子发射光谱法通则[S].
  • 2符斌 殷欣平.ICP光谱分析指南[M].北京:冶金工业出版社,1999..

共引文献1

同被引文献576

引证文献5

二级引证文献20

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部