期刊文献+

TiB_2陶瓷材料氧化动力学研究 被引量:2

The Study on Oxidative Dynamic of TiB_2 Ceramic
下载PDF
导出
摘要 采用Φ函数法,计算了TiB2陶瓷在空气中氧化时的ΔGR°值。计算表明,在700—1100℃的温度区间内,TiB2陶瓷将会发生氧化。在硅碳棒高温炉中进行了TiB2陶瓷的氧化试验,并推导了TiB2陶瓷的氧化动力学公式。研究表明,TiB2陶瓷在空气中中温氧化时,其氧化行为表现为氧化增重随时间的变化服从抛物线规律;在研究的温度范围内,TiB2陶瓷的氧化活化能为44982.8J/mol;TiB2陶瓷材料的氧化主要由氧通过氧化层的向内扩散所控制。 The ΔGR° of TiB2 ceramic which oxidates in atmosphere is calculate by using Φ function. The calculation shows: in the temperature range of 700 - 1 100 ℃, the TiB2 ceramic will oxidize. The oxidative has been done in silicacarbon high temperature furnace, at the same time; the oxidative dynamic formula has been deduced. The study shows: the oxidation weight gain of TiB2 ceramic when it is oxidized in medium temperature atmosphere follows parabolic law as the time increases; in the study temperature range, the oxidative active energy of TiB2 ceramic is 44 982.8 J/mol; the oxidation of TiB2 ceramic is controlled by inside diffusion of oxygen through oxidative layer.
出处 《陶瓷》 CAS 2006年第7期19-21,共3页 Ceramics
关键词 TIB2陶瓷 氧化动力学 活化能 抛物线规律 氧化增重 TiB2 ceramic Oxidation dynamic Active energy Parabolic law Oxidation weight gain
  • 相关文献

参考文献3

二级参考文献9

共引文献75

同被引文献33

  • 1齐共金,张长瑞,胡海峰,曹峰,王思青,曹英斌,姜勇刚.陶瓷基复合材料天线罩制备工艺进展[J].硅酸盐学报,2005,33(5):632-638. 被引量:44
  • 2司文捷.直接凝固注模成型Si_3N_4及SiC陶瓷──基本原理及工艺过程[J].硅酸盐学报,1996,24(1):32-37. 被引量:43
  • 3张学军,郑永挺,韩杰才.先进陶瓷材料胶态成型工艺研究进展[J].宇航材料工艺,2006,36(1):16-20. 被引量:13
  • 4段庆瑞,祝炳和.功能陶瓷的显微结构、性能与制备技术.北京:冶金工业出版社,2005
  • 5Smith P A. Particle crowding analysis of slip casting. J Am Ceram Soc,1995,78(3):809-812
  • 6黄勇.等.94全国结构陶瓷、功能陶瓷、金属/陶瓷封接学术会议论文集.北京怀柔:1994.9-19
  • 7Gao J W, Wang C Y. Modeling the solidification of functionally graded materials by centrifugal casting. Materials Science and Engineering, 2000, A292 :207-215
  • 8Kim K H, Cho S J, Yoon K J, et al. Centrifugal casting of alumina tube for membrane application. Journal of Membrane Science, 2002,199 : 69-74
  • 9Salomoni A,Stamenkovie I,Castanho S M, et al. Pressure filtration of Si3N4. J Eur Ceram Soc, 1997,17:267-271
  • 10Ferreira J M F,Diz H M M. Effect of driving force on pressure slip casting of silicon carbide bodies, J Eur Ceram Soc, 1998,18:1 171-1 175

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部